AMD 2600 CrossFire is, Not functioning, Before, CrossFire can, Be enabled, you, Need to close

43

CrossFire™-Specific Troubleshooting

Problem	Possible solution
CrossFire™ is	In order for CrossFire™ to function, the CrossFire™
not functioning	bridge interconnects must correctly connect the
	CrossFire™ graphics cards.
	1.	Connect one end of the CrossFire™ bridge
		interconnect to the internal VMO connection on one of
		the cards.
	2.	Connect the other end of the CrossFire™ bridge
		interconnect to the corresponding internal VMO
		connection of the other card.
	3.	Repeat Steps 1 and 2 to connect the second
		CrossFire™ bridge interconnect.
	4.	Connect the DVI-I connection on the primary
		CrossFire™ graphics card to your monitor.
“Before	You cannot enable CrossFire™ in the ATI Catalyst™
CrossFire™ can	Control Center if a 3D application, game, or video
be enabled, you	playback, such as a DVD movie, is running.
need to close the	Close all open 3D applications, games, and movie player
3D application or	applications, and then enable CrossFire™.
video playback
that is currently
running.”
CrossFire™	Ensure the CrossFire™ bridge interconnects have been
Aspect in ATI	correctly attached. The CrossFire™ aspect is only
Catalyst™	available when the two ATI Radeon™ HD 2600 Series
Control Center is	graphics cards have been correctly installed and
Not Displayed	connected together.
“CrossFire™ Is	This error occurred because CrossFire™ did not correctly
Currently	detect your graphics hardware or there is a problem with
Unavailable.”	the software.
	Make sure:
	•	The graphics cards are installed correctly.
	•	The interconnects are installed correctly.
	•	All running 3D applications are closed.
	•	You restart the ATI Catalyst™ Control Center.
	For information on installing the software see the Getting
	Started Guide that came with your graphics card.
Screen rotation	Screen rotation is not an available feature on CrossFire™
function does not	systems.
work or is
unavailable