30
Connecting a media device for video capture
Use a video in/video out cable to connect the
Capture video to a computer
1Connect one end of the cable to the
Note:
2Start the video capture software in record mode. For more information, see the documentation that came with the video capture software.
3Power on the TV or hit Play on the TV or VCR.
Note: To capture sound, you must connect the line out port of the media device to the line in port of the sound card. Audio cables are available from consumer electronics dealers.
Setting the Windows® Volume Control
For correct audio performance, the sound card line input must be active.
Depending on the operating system you use, choose either the Windows® XP or Windows Vista™ procedure:
•Display the Line Input settings (Windows®)
•Display the Line Input settings (Windows Vista™)
Display the Line Input settings (Windows®)
1On the taskbar,
If the volume icon is not in the System Tray, do the following:
a)Click Start, and then click Control Panel.
b)
c)In the Volume tab, select Place volume icon in the taskbar.
2Click Open Volume Controls.
3If the