AMX 1000 Series, DCS1000 manual RS232 Out Connector, IR Out Connector

NOVARA ControlPads

RS232 Out Connector

FIG. 9 illustrates connecting a 1000 Series ControlPad to RS232-controlled devices:

RS232 Device

Signal

SHARED 12V

GND

FIG. 9 RS232 Out Connector

NOVARA ControlPads support one-way RS-232 control (RS-232 TX signals to the third-party device, not RS-232 RX signals from the controlled device).

IR Out Connector

If using the CC-NIRC IR emitter with 2-pin phoenix connector (not included), be aware that the IR Emitter polarities on NOVARA ControlPads are opposite to that of other AMX equipment. This is not an issue if using the included 10-pin connector.

FIG. 10 illustrates connecting the IR transmitter heads to a 1000 Series ControlPad for IR-controlled devices:

SHARED 12V

IR Transmitter	Signal
	GND

FIG. 10 IR OUT Connector

The IR Transmitter must be placed directly in front of the controlled device’s IR window.

Novara ControlPads & KeyPads 11