AMX 1000 Series, DCS1000 manual Time Out, Select Button Feedback Select Action

AMX NOVARA DCS1000 Device Configuration Software

3.Add commands to the Event Script to define the functions that you want the ControlPad to perform on startup (FIG. 86).

a. Select a button action from the Select Action drop-down menu (FIG. 85):

FIG. 85 Select Button Feedback - Select Action

b.Click Add To Script to add the selected button action to the Start Up (Event) script.

c.Add other button actions as desired to the Start Up (Event) script (FIG. 86).

FIG. 86 Program Start Up Event Script

Time Out

A Script can be written to execute if a button press is not detected within a set time period. For example, switching equipment off that may have been left running overnight.

Three time periods can be set:

1.From the Ancillary options (in the System window), select Time Out (FIG. 87):

FIG. 87 Ancillary options - Time Out

2.This invokes the Time Out window (FIG. 88):

FIG. 88 Time Out window

3.Use the arrows on the Hours and Minutes fields to set a time for Time Period 1.

4.Write a script, as usual.

When the panel is configured and a button press is not detected within the time period then the script will execute.

Novara ControlPads & KeyPads 75