AMX MAX-AVM manual Replace the Faceplate FIG

MAX-AOM Audio-Only (USB) Module

3.Position the SIde Mounting Bracket to AOM #1, using the tabs to ensure proper positioning, Use six of the supplied screws to secure the Side Mounting Bracket to AOM #1 (FIG. 7).

AOM #2

Side Mounting Bracket

AOM #1

(front) (front)

These mounting surfaces (on front and rear of the bracket) secure the AOM #1/bracket assembly to AOM #2

FIG. 7 Securing the Side Mounting Bracket

4.Use the tabs on the Side Mounting Bracket to position and connect the AOMs.

5.Secure the AOM #1/side bracket assembly to AOM #2 using the supplied screws. Two screws in the front and two in the back secure the Side Mounting Bracket to the AOM #2 enclosure.

6.Use three screws to attach the Short Rack-Mount Bracket to the front left side of AOM #2, then secure the short bracket/AOM #2 assembly to the equipment rack with two screws (on the front of the bracket) (FIG. 8).

Short

Rack-Mount

Bracket

(front) (front)

FIG. 8 Attaching the Short Rack-Mount Bracket

7.Replace the Faceplate (FIG. 9).

Faceplate

FIG. 9 Replacing the Faceplate

8 MAX AOM and AVM Modules