AMX MAX-AVM manual MAX-AOM Audio-Only USB Module, Overview, Product Specifications

MAX-AOM Audio-Only (USB) Module

MAX-AOM Audio-Only (USB) Module

Overview

The MAX-AOM Audio-Only Module (FIG. 2) is a streaming audio playback USB module that distributes up to four stereo outputs (both digital and analog).

The AOM is available either as a single unit (FG 2178-55), or as two units using the optional AOM-EX Expansion Kit (FG 2178-56) that mount side-by-side within a single rack unit. The AOM-EX adds another four audio outputs, to allow up to eight audio-only outputs. Note that the AOM-EX does not include a faceplate.

OUTPUT 1 OUTPUT 2

OUTPUT 3 OUTPUT 4 (rear)

Power Connector

USB connector (to MMS server)

FIG. 2 MAX-AOM Audio-Only Module - rear panel connectors

The MMS-01S, MMS-02S and MMS-02SB servers feature two built-in audio output channels, and support one MAX-AOM (for a maximum total of six audio output channels).

The MMS-04S, MMS-12S and MMS-900 servers support two MAX-AOMs (for a maximum total of eight audio output channels).

Do not use a USB hub with MMS servers or AOM modules.

Product Specifications

MAX-AOM (FG 2178-55) Specifications

Power:	• 5VDC 0.9A external power supply
	• 110-240 VAC 50/60 Hz
AC Current Draw (AMP):	• .09A - Bootup/Power Cycle Peak
	• .09A - Normal Usage Peak
Audio Output:	• 4 audio output channels, each with RCA SPDIF digital, analog stereo
	• Digital audio output: 6-channel Dolby Digital and DTS
	• Analog audio output: stereo
	• 24-bit D/A conversion, 128X over sampling
	• 48kHz sampling rate
	• Output level -10dBV nominal
	• Signal to Noise Ratio 110db A-weighted

MAX AOM and AVM Modules 3