Program is not loaded | AMX AXP-CPI16 instruction

AXlink Status LED	Indicates AXlink communication status as follows:
	• One blink per second communication is functioning.
	• Two blinks per second devices specified in the master program do not match the
	specified devices found.
	• Three blinks per second indicate an AXlink communication error.
	• Full-on indicates there is no AXlink control or activity (but power is on), or the Axcess
	program is not loaded.

Device DIP Switch	8-position DIP switch sets AXlink device ID.

Cables	Two 3-foot (91.4 cm) ribbon cables each with a female 20-pin header.

2	AXP-CPI16 16-Channel Custom Panel Interface

program is not loaded.