Pifa antenna with metal plate

Installation Guide

NXA-WC80211GCFWireless Compact Flash Card

For more detailed installation and operating instructions, refer to the related MVP, CV7, and CV10 Instruction Manuals, available on-line at www.amx.com.

FIG. 1 NXA-WC80211GCF wireless card

Overview of the NXA-WC80211GCF Card

This interface card (FG2255-07) is a 2.4 GHz WiFi LAN CF Card which upgrades a Modero panel’s wireless RF capabilities from 802.11b to 802.11g. This card also provides the end-user with several new methods of wireless encryption and data security such as WPA and WPA2. In addition to being backwards compatible with 802.11b networks, this card can be installed in all current MVP, CV7, and CV10 panels. To fully utilize these newer wireless security features, this card must be used in tandem with the latest Modero firmware upgrade available at www.amx.com.

Specifications

NXA-WC80211GCF Specifications

Dimensions (HWD):	•	0.22" x 1.68" x 2.40" (5.6 mm x 42.80 mm x 61.0 mm)

Weight:	•	19.50 grams (0.043 lbs)

Description:	•	Wireless LAN Compact Flash Card with external PIFA antenna.
	• Features enterprise-class security such as WPA and WPA2 security.

Features:	•	Compact Flash Type I form factor
	•	Enhanced range and throughput
	•	Features wireless security such as: WPA, WPA2 and WEP
	•	Field-installable
	•	Incorporates DSSS and OFDM radio technology
	•	Operates at ISM frequency bands of 2.4 GHz, while providing data
	•	transfer speeds of up to 54Mbps.
	•	Support for IEEE 802.11b and 802.11g
	• Supports Advanced Encryption Standard (AES) 64-bit and 128-bit data
	•	encryption, along with an Re4 encryption cipher (64/128-bit)
	•	Supports authentication methods such as: EAP-FAST, EAP-LEAP,
		EAP-PEAP, EAP-TLS, and EAP-TTLS
	• Supports Wired Equivalent Privacy (WEP) 64-bit and 128-bit data
		encryption (known to the on-board firmware as Static WEP)

Antenna Type:	•	External PIFA antenna (factory-installed)

Bus Interface:	•	Compact Flash Type I

Certifications:	•	FCC Part 15 Class B, CE, IC, TELEC, and Wi-Fi

Media Access	•	CSMA/CA with ACK
Control Technique:

Media Access	•	Using 802.11b DSSS communication:
Control Techniques:		DBPSK @ 1 Mbps
		DQPSK @ 2 Mbps
	•	CCK @ 5.5 Mbps
	•	Using 802.11g OFDM communication:
		BPSK @ 6 and 9 Mbps
		QPSK @ 12 and 18 Mbps
		16-QAM @ 24 and 36 Mbps
		64-QAM @ 48 and 54 Mbps

Network	•	Infrastructure mode (Client-to-Access Point)
Architecture:

Operating	•	Using 802.11b & g communication:
Channels:		- 04: (Ch 10 - 13) - France
		- 11: (Ch 1 - 11) - North America (USA)
		- 13: (Ch 1 - 13) - Europe ETSI
		- 13: (Ch 1 - 13) - Japan (802.11g)
		- 14: (Ch 1 - 14) - Japan (802.11b)
	Note: To alter the card’s default country code (North America),
	please contact an AMX Technical Support representative for
	detailed procedures and information.

Operating	•	Temperature: 0°C ~ 45°C (32°F to 113°F) (operating) and
Environment:	•	-20°C ~ 70°C (-4°F to 158°F) (storage)
	•	Humidity: (non-condensing) 5% ~ 90% RH (operating) and
		(non-condensing) 5% ~ 95% RH (storage)

Operating Voltage:	•	3.3V + 5% I/O supply voltage

NXA-WC80211GCF Specifications (Cont.)

Power	•	@ 802.11b communication:
Consumption:		- RX: 270 mA
		- TX: 435 mA
	•	- Standby: 240 mA
	•	@ 802.11g communication:
		- RX: 270 mA
		- TX: 460 mA
		- Standby: 240 mA

Radio Data Rate:	•	802.11g compliant: 1, 2, 5.5, 11 (DSSS/CCK); 6, 9, 12, 18, 24, 36, 48,
		and 54 (OFDM) Mbps data rates

Radio Technology:	•	Using 802.11b communication: DSSS (Direct Sequence Spread
	•	Spectrum)/CCK (Complementary Code Keying)
	•	Using 802.11g communication: DSSS/CCK, OFDM (Orthogonal
		Frequency Division Multiplexing

Receiver Sensitivity:	•	Using 802.11b communication @ FER<8%:
		1 Mbps: -94 dBm (max)
		2 Mbps: -93 dBm (max)
		5.5 Mbps: -92 dBm (max)
		11 Mbps: -90 dBm (max)
	• Using 802.11g communication @ PER <10%:
		6 Mbps: -87 dBm (max)
		9 Mbps: -86 dBm (max)
		12 Mbps: -86 dBm (max)
		18 Mbps: -84 dBm (max)
		24 Mbps: -82 dBm (max)
		36 Mbps: -78 dBm (max)
		48 Mbps: -74 dBm (max)
		54 Mbps: -72 dBm (max)

RF Frequency	•	Using 802.11b & g communication:
Ranges:		Europe ETSI: 2.412 ~ 2.472 GHz
		France: 2.457 ~ 2.472 GHz
		Japan (802.11b): 2.412 ~ 2.484 GHz
		Japan (802.11g): 2.412 ~ 2.472 GHz
		North America: 2.412 ~ 2.462 GHz

Standard	•	IEEE 802.11b
Conformance:	•	IEEE 802.11g
	•	IEEE 802.11e
	•	IEEE 802.11i
	•	Wi-Fi (WPA and WPA2)

Touch Panel	•	MVP-7500 (FG5965-01)
Compatibility:	•	MVP-8400 (FG5965-02)
	• MVP-8400i (FG5965-04)
	• NXD-CV10 (FG2259-02)
	• NXT-CV10 (FG2259-01/03)
	• NXD-CV7 (FG2258-02)
	• NXT-CV7 (FG2258-01)

Transmit Output	•	802.11b communication: 12 +-1 dBm (1, 2, 5.5, 11 Mbps)
Power:	•	802.11g communication: 12 +-1 dBm (6, 9, 12, 18, 24, 36, 48,
		and 54 Mbps)

Wireless LAN	•	EAP-FAST
Security:	•	EAP-LEAP
	• EAP-PEAP
	•	EAP-TLS
	•	EAP-TTLS
	• WEP 64 & 128
	• WPA-PSK

Included	•	Double-sided adhesive tape
Accessories:	•	Mounting Template cutout (62-2255-04)
	•	NXA-WC80211GCF Quick Start Guide
	•	Two Alcohol cleaning pads
	• Wireless CF card with wireless antenna

Other AMX	•	NXA-WAP250G Modero Wireless Access Point (FG2255-50)
Equipment:	•	Upgrade Compact Flash memory (factory programmed with firmware).
		These Compact Flash cards now come with panel-specific firmware
		for the MVP, CV7, and CV10 touch panels.

Before You Begin - Upgrade the Firmware

1.Upload the latest panel-specific kit file to your existing MVP, CV7, or CV10 touch panel and then confirm the firmware file update was successful. Refer to your panel’s instruction manual for detailed communication and Kit file upload procedures.

Note: Each panel should be updated using its associated panel-specific kit file (SW5965_01.kit for the MVP-7500, SW5965_02.kit for the MVP-8400, SW2258_02 for the CV7, and SW2259_02 for the CV10).

This new firmware file provides both backwards compatibility with the previous 802.11b cards and new security protocols for the new 802.11g wireless CF card.

Caution: If you don’t first update the firmware file on the panel, before proceeding with the card upgrade process, you will be required to configure NetLinx Studio to communicate with the target panel via a direct USB connection. In this communication scenario, your PC acts as a Virtual NetLinx Master establishing a secure USB connection to the target panel and then uploading the new Kit file.

NXA-WC80211GCF specifications

The AMX NXA-WC80211GCF is a powerful wireless controller designed specifically for enhancing and managing Wi-Fi networks in commercial environments. This device is engineered to support the demanding requirements of businesses, allowing them to deploy scalable wireless networks with ease and efficiency.

One of the standout features of the NXA-WC80211GCF is its ability to support 802.11g wireless standards, offering data rates of up to 54 Mbps. This makes it suitable for a range of applications, from simple web browsing to more intensive data transfer needs. Additionally, it is backward compatible with older standards, ensuring that legacy devices can still connect without issues.

The controller provides centralized management for multiple access points, allowing IT administrators to streamline the deployment and maintenance of their wireless networks. With its user-friendly interface, the NXA-WC80211GCF enables easy configuration, monitoring, and troubleshooting of the entire system. The ability to manage multiple access points enhances overall network performance and ensures consistent connectivity throughout the facility.

Security is a top priority with the NXA-WC80211GCF. It supports WPA2 encryption, providing a robust layer of protection against unauthorized access. The device can also be configured to implement guest networking options, allowing businesses to offer internet access to visitors without compromising the security of the internal network.

The AMX NXA-WC80211GCF is designed with scalability in mind. It can support multiple SSIDs, enabling different network types for diverse user groups, such as employees, guests, and devices requiring IoT support. This flexibility ensures that enterprises can adapt their network configurations as their needs evolve.

Moreover, the controller is equipped with quality of service (QoS) features, which prioritize bandwidth allocation for mission-critical applications. This ensures that essential services maintain optimal performance, even during peak usage times.

In summary, the AMX NXA-WC80211GCF is a robust wireless controller that combines user-friendly management, strong security protocols, and scalability in a single solution. With its support for the 802.11g standard, it addresses the connectivity requirements of businesses looking to provide reliable wireless access to their users. By choosing the NXA-WC80211GCF, organizations can optimize their network performance and enhance their operational efficiency.

Installation Guide

NXA-WC80211GCFWireless Compact Flash Card