Table of Contents Table des matières Indice

Table des matières

Indice

English	1
Français	8
Español	30

Disclaimer

This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive instructions on installing your motherboard and peripherals, please refer to the user's manuals which come with your components and drives.

SLK2600AMB - Super Mini Tower Case

Power Supply

The power supply installed in this case comes with a main power switch. Make sure you turn the switch to the ON ( I ) position before you boot up your computer for the first time. In normal operation there is no need to turn the switch to the OFF (O) position since the power supply is equipped with a soft on/off feature which turns your computer on and off through the soft switch on your computer case. You may occasionally need to turn the switch to the OFF position should your computer crash and you cannot shut it down through use of the soft switch.

[Applicable only to models designed for sale in the European Union: Solution power supply models designed for the EU include Power Factor Correction (PFC) circuitry in accord with European standard regulation code EN61000-3-2. By altering the input current wave shape, PFC improves the power factor of the power supply and results in increased energy efficiency, reduced heat loss, prolonged life for power distribution and consumption equipment, and improved output voltage stability.]

Note (not applicable to models designed for the European Union): Check the red power supply voltage switch setting before installation. It should be the same as your local power voltage (115V for North America, Japan, etc. and 230V in Europe and many other countries). Change the voltage setting if necessary. Failure to take this precaution could result in damage to your equipment and could void your warranty.

Set Up

1.Take the case out of the box.

2.Remove the Styrofoam.

3.Remove the plastic bag.

4.Place the case upright on a stable flat surface with the power supply fan at the back facing you .

5.Remove the screws from the right side panel. Grip the panel at the finger-grip indent and slide it towards you to open the case.

6.Inside the case you should see the power supply, some wiring with marked connectors (USB, PWR etc.), an installed I/O panel, a power cord. You will also find an Expansion Slot Protective Cover mounted right above the expansion slots.

7.Press the tab on the Protective Cover to remove the cover for expansion card installation.

Note: This cover has a compartment marked "hardware" to store your hardware (screws, brass standoffs, plastic stands, etc.).

Motherboard Installation

This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult your motherboard manual for specific mounting instructions and troubleshooting.

1.Lay the case down so that the open side is up. You should be able to see the drive cage and power supply.

SLK2600AMB specifications

The Antec SLK2600AMB is a mid-tower ATX computer case that has garnered attention for its combination of style, functionality, and effective cooling solutions. Designed for both gamers and professionals, this case provides ample space for comprehensive builds while incorporating several unique features.

One of the standout aspects of the SLK2600AMB is its sleek and understated design. The case has a brushed aluminum exterior that adds a touch of sophistication, making it suitable for both home and office environments. Its black finish is complemented by a clear acrylic side panel, allowing users to showcase their internal components and lighting setups.

In terms of housing capacity, the SLK2600AMB supports standard ATX, micro-ATX, and mini-ITX motherboards, providing versatility for different build requirements. It also includes sufficient drive bays, accommodating up to three 5.25-inch external optical drives and ample space for hard drives, with up to four 3.5-inch drives and an additional two 2.5-inch SSDs. This flexibility is essential for users who require a combination of storage options.

Cooling is another critical feature of the Antec SLK2600AMB. The case is designed with optimal airflow in mind, featuring multiple fan mounting locations. It comes equipped with an exhaust fan at the rear and has room for additional intake fans at the front. This configuration allows for improved thermal management, helping to maintain lower system temperatures during heavy workloads or gaming sessions. Additionally, the case includes ventilation grilles and filtered dust screens, ensuring that airflow remains efficient while keeping dust accumulation at bay.

Cable management is also a focal point of the SLK2600AMB's design. It features strategically placed cutouts and tie-down points that enable users to route cables neatly, leading to an organized interior that enhances airflow and aesthetics. This feature is particularly beneficial for those who take pride in a clean and professional-looking build.

Furthermore, the SLK2600AMB incorporates Antec's proprietary high-performance materials, ensuring durability and resilience. Its sturdy construction not only enhances longevity but also provides a sense of security for users planning to invest in higher-end components.

In conclusion, the Antec SLK2600AMB stands out as a reliable and stylish computer case that meets the needs of a wide range of users. With its ample space, effective cooling solutions, and thoughtful design features, it continues to be a popular choice for both casual and serious PC builders.