D-Link DES-1226G manual QoS Setting, Device Status

Page 19

Port Setting: Select the “Port Setting” at Operation Tab, when the port is uncheck, it means that the port will auto-learn to forward the packets, and when the selected port was checked, then the port will follow the Static MAC rule to forward the packets.

Figure 35. Add/Delete Static MAC

QoS Setting

To set the Switch QoS base on IEEE 802.1p,

Figure36. 802.1P-based QoS Setting

Device Status

Click on the “Status” to present the device status on this screen. It will display the System Status, Port Status, VLAN Status, Trunk Status, and Mirror Status.

Press “Refresh” when you need to renew the posted information.

Figure 37. Device status

19

Image 19

Contents Manual Contents Package Contents Vlan Virtual Local Area Network Features and BenefitsPorts 1-24 Status LEDs Rear Panel Front PanelAC Power Connecting Network CableRack Mounting Discovery List ConfigurationView trap button Monitor ListToolbar Device SettingLogin Configuring the SwitchDevice Status Setup MenuVlan Settings Virtual Local Area Network Port SettingsVID table setting Port VID Setting Trunk SettingMirror Setting Snmp SettingConfigure Snmp Trap Delete Snmp Trap Static MACDynamic forwarding table Device Status QoS SettingTrap Setting System SettingSet Password Reset Setting Backup SettingLogout CSMA/CD Page Page Product Registration International Offices Registration Card All Countries and Regions Excluding USA