D-Link DES-1226G manual Logout, Backup Setting, Reset Setting

Page 21

Figure 40. Set Password

Backup Setting

The backup tools help you to backup the current settings of the Switch. To backup your settings, press the “Backup” button.

To restore a current settings file to the device, you must specify the backup file and click on the “Restore” button to process the setting of the recorded file.

Figure 41. Backup Setting

Note: when restoring a recorded file, the current password will not be erased.

Reset Setting

The Factory Reset button helps you to reset the device back to the default settings from the factory. Be aware that the entire configuration will be reset; the IP address of the device will be set to default setting of 192.168.0.1.

Figure 42. Reset Setting

Logout

When pressing the “Logout” button, you will be logged out and the Web configuration will return to the first Login page.

Figure 43. Logout

21

Image 21

Contents Manual Contents Package Contents Vlan Virtual Local Area Network Features and BenefitsPorts 1-24 Status LEDs Rear Panel Front PanelConnecting Network Cable AC PowerRack Mounting Discovery List ConfigurationView trap button Monitor ListToolbar Device SettingLogin Configuring the SwitchDevice Status Setup MenuVlan Settings Virtual Local Area Network Port SettingsVID table setting Port VID Setting Trunk SettingMirror Setting Snmp SettingConfigure Snmp Trap Delete Snmp Trap Static MACDynamic forwarding table Device Status QoS SettingSystem Setting Trap SettingSet Password Backup Setting Reset SettingLogout CSMA/CD Page Page Product Registration International Offices Registration Card All Countries and Regions Excluding USA