D-Link manual Connecting the Switch, Port Speed & Duplex Mode, PC to DES-1008E

Page 14

ENGLISH

Connecting the Switch

PC to DES-1008E

A computer can be connected to the DES-1008E via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover cable. A computer equipped with a RJ-45 10/100Mbps port can be connected to any of the eight DES-1008E ports.

The LED indicators for the PC connection depend on the capability of the computer’s Ethernet card. If the LED indicators are not lit after making a proper connection, check the computer’s Ethernet card, the cable, and the DES-1008E’s conditions and connections.

Hub/Switch to DES-1008E

A hub (10 or 100BASE-TX) can be connected to the DES-1008E via a two-pair Category 3, 4, or 5 UTP/STP Straight-Through or Crossover cable. For 100Mbps operation a Category 5 cable must be used. The connection is accomplished from any port of the hub to any port of the DES-1008E.

DES-1008E to Other Devices

The DES-1008E can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover cable. A Category 5 (or higher) cable must be used for 100Mbps operation. The connection can be accomplished from any (MDI-X) port on the DES-1008E to any of the 10Mbps or 100Mbps (MDI-X) ports on another switch or other devices.

Port Speed & Duplex Mode

After plugging the selected cable to a specific port, the system uses auto-negotiation to determine the transmission mode, auto-detecting the network speed (10Mbps or 100Mbps) for any new twisted-pair connection.

If the attached device does not support auto-negotiation or has auto-negotiation disabled, an auto-sensing process is initiated to select the speed and half-duplex mode is selected.

14

Image 14
Contents Page Date Description PrefaceManual Revisions Table of Contents Safety Instructions Safety CautionsEnglish Protecting Against Electrostatic Discharge Introduction Package ContentsSetup Switching Technology Features Other key features includeTop Panel LEDs Power IndicatorHardware Overview Link/ActAuto MDI/MDI-X Ports Power JackRear Panel Connections Installation Before You Connect to the NetworkMounting on a wood wall Mounting the Switch on the WallMounting on a cement wall Hub/Switch to DES-1008E Connecting the SwitchPort Speed & Duplex Mode PC to DES-1008ETroubleshooting Does the DES-1008E switch have an uplink port?Networking Basics Check your IP addressStatically Assign an IP address StepGlossary Bootp CSMA/CDMDI IPXLAN Rmon MDI-XMIB RPSUDP TCP/IPTftp VlanTechnical Specifications EMI Internet Support Contacting Technical SupportPhone Support Registration

DES-1008E specifications

The D-Link DES-1008E is an 8-port 10/100 Mbps Fast Ethernet switch that stands out as an efficient and reliable solution for small to medium-sized networks. Designed with ease of use and performance in mind, this switch delivers excellent connectivity and supports a range of networking applications.

One of the major features of the DES-1008E is its Plug and Play functionality, which allows for effortless installation without the need for complicated configuration. Users can simply connect the switch to their existing network devices, and the system will automatically detect them, making it ideal for those with limited technical expertise.

The DES-1008E is equipped with 8 10/100 Mbps Ethernet ports, enabling users to connect multiple devices such as computers, printers, and servers. This makes it perfect for creating a small network in home offices or small businesses. Each port supports auto-negotiation, allowing for automatic adjustment to the highest speed supported by the connected device, thus ensuring optimal communication efficiency.

This switch also incorporates advanced features such as Ethernet Flow Control, which helps to minimize packet loss during data transmission. Additionally, the DES-1008E supports MAC address learning and aging, providing enhanced network management and reducing the risk of collisions.

Energy efficiency is another significant aspect of the DES-1008E. It complies with the IEEE 802.3az Energy Efficient Ethernet standard, which helps to reduce power consumption when the network is idle without compromising performance. This feature not only lowers operational costs but also contributes to a greener environment.

Moreover, the compact design of the D-Link DES-1008E makes it suitable for desktop placement or mounting in a server rack. Its robust metal housing ensures durability and reliable operation under varying conditions.

In summary, the D-Link DES-1008E is a versatile and efficient Ethernet switch that meets the demands of modern networking. With its easy installation, advanced features, energy-efficient operation, and durable design, it is an excellent choice for home users and small businesses looking to enhance their network infrastructure. Whether for file sharing, printer access, or internet connectivity, the DES-1008E delivers high-speed performance and reliable connectivity, making it a valuable addition to any network setup.