English

•To help avoid damaging your system, be sure the voltage selection switch (if provided) on the power supply is set to match the power available at your location:

–115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South Korea and Taiwan.

–100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan.

–230 V/50 Hz in most of Europe, the Middle East, and the Far East.

•Also be sure that attached devices are electrically rated to operate with the power available in your location.

•Use only approved power cable(s). If you have not been provided with a power cable for your system or for any AC-powered option intended for your system, purchase a power cable that is approved for use in your country. The power cable must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cable should be greater than the ratings marked on the product.

•To help prevent an electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local/national wiring rules.

•When connecting or disconnecting power to hot-pluggable power supplies, if offered with your system, observe the following guidelines:

–Install the power supply before connecting the power cable to the power supply.

–Unplug the power cable before removing the power supply.

–If the system has multiple sources of power, disconnect power from the system by unplugging all power cables from the power supplies.

DES-1008E specifications

The D-Link DES-1008E is an 8-port 10/100 Mbps Fast Ethernet switch that stands out as an efficient and reliable solution for small to medium-sized networks. Designed with ease of use and performance in mind, this switch delivers excellent connectivity and supports a range of networking applications.

One of the major features of the DES-1008E is its Plug and Play functionality, which allows for effortless installation without the need for complicated configuration. Users can simply connect the switch to their existing network devices, and the system will automatically detect them, making it ideal for those with limited technical expertise.

The DES-1008E is equipped with 8 10/100 Mbps Ethernet ports, enabling users to connect multiple devices such as computers, printers, and servers. This makes it perfect for creating a small network in home offices or small businesses. Each port supports auto-negotiation, allowing for automatic adjustment to the highest speed supported by the connected device, thus ensuring optimal communication efficiency.

This switch also incorporates advanced features such as Ethernet Flow Control, which helps to minimize packet loss during data transmission. Additionally, the DES-1008E supports MAC address learning and aging, providing enhanced network management and reducing the risk of collisions.

Energy efficiency is another significant aspect of the DES-1008E. It complies with the IEEE 802.3az Energy Efficient Ethernet standard, which helps to reduce power consumption when the network is idle without compromising performance. This feature not only lowers operational costs but also contributes to a greener environment.

Moreover, the compact design of the D-Link DES-1008E makes it suitable for desktop placement or mounting in a server rack. Its robust metal housing ensures durability and reliable operation under varying conditions.

In summary, the D-Link DES-1008E is a versatile and efficient Ethernet switch that meets the demands of modern networking. With its easy installation, advanced features, energy-efficient operation, and durable design, it is an excellent choice for home users and small businesses looking to enhance their network infrastructure. Whether for file sharing, printer access, or internet connectivity, the DES-1008E delivers high-speed performance and reliable connectivity, making it a valuable addition to any network setup.