D-Link DES-1252 user manual Definitions of the Monitor List functions and terms

Page 28

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap information will be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

Group Interval: Shows the Group Interval of the device.

Monitor List

All Web-Smart devices in the Monitor List can be monitored, with Trap information available to be received for monitoring status information of the device.

Definitions of the Monitor List functions and terms:

S:Shows the system symbol of the Web-Smart device, represents the device system is inactive.

IP Address: Shows the current IP address of the device.

MAC Address: Shows the device MAC Address.

Protocol version: Shows the version of the Utility protocol.

Product Name: Shows the device product name.

System Name: Shows the appointed device system name.

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows the appointed description for the device location.

Trap IP: Shows the IP where the Trap to be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

23

Image 28

Contents DES-1252 Table of Contents Page Iii Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionSwitching Technology Fast Ethernet TechnologyFeatures IEEE802.1X Port-based Access ControlTechnical Specifications Key Components / Performance Switching CapacityForwarding Mode Max. Forwarding RateSdram for CPU Flash MemoryPort Functions Combo portsChassis Dimensions Reset button onTemperature 1000Mbps CopperStorage Temperature Power consumptionEmission EMI and Safety Certifications HumidityInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power Reset button LED IndicatorFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~48Rear Panel AC Power Connector10/100/1000 BASE-T Twisted Pair Ports Port 51~52 Power and System LEDs Understanding LED IndicatorsPower LEDs Ports 1 ~ 48 Status LEDs Link/Act Ports 51~52 10/100/1000 Base-T LEDs Link/Act Link/Act for UTP ports10/100Mbps shown in Amber Light Page Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarOption includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and termsView trap Device Setting This space has been intentionally reserved for notesFirmware Upgrade Login Web-based ManagementLog in screen Tool Menu Tool MenuSetup Menu Tool Menu Firmware Backup and UploadSystem System Setting C PSystem Trap Setting System System SettingSystem Port Setting System Trap SettingSystem Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration 802.1Q Vlan VID AssignmentsConfiguration Igmp Snooping Configuration Igmp Snooping ConfigurationPage Page Configuration 802.1D Spanning Tree Configuration Igmp Router port SettingsConfiguration Spanning Tree Page Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority Security Safeguard EngineSecurity 802.1X Setting Security Broadcast Storm ControlSecurity 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Monitoring StatisticsMonitoring Statistics Monitoring Port Statistics