D-Link DES-1252 user manual System System Setting, C P

Page 36

Figure 22 –Setup Menu

System > System Setting

The System Setting includes IP Information and System information. There are two ways for the switch to attain IP: Static and DHCP

D H C P

When using static mode, the IP Address, Subnet Mask and Gateway can be manually configured. When using DHCP mode, the Switch will first look for a DHCP server to provide it with an IP address, network mask, and default gateway before using the default or previously entered settings. By default the IP setting is static mode.

By entering a System Name and System Location, the device can more easily be recognized through the SmartConsole Utility and in other Web-Smart devices on the LAN. The Login Timeout controls the idle time-out for security purposes, when there is no action in the Web-based Utility. When the Login Timeout expires, the Web-based Utility requires a re-login before using the Utility again. The Group Interval send IGMP v1 report packet by switch, it is for SmartConsole Utility to discovery our switch when we in IGMP

31

Image 36

Contents DES-1252 Table of Contents Page Iii Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionSwitching Technology Fast Ethernet TechnologyFeatures IEEE802.1X Port-based Access ControlTechnical Specifications Key Components / Performance Switching CapacityForwarding Mode Max. Forwarding RateSdram for CPU Flash MemoryPort Functions Combo portsChassis Dimensions Reset button onTemperature 1000Mbps CopperStorage Temperature Power consumptionEmission EMI and Safety Certifications HumidityInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power Reset button LED IndicatorFront Panel 10/100 BASE-TX Twisted Pair Ports Port 1~48AC Power Connector Rear Panel10/100/1000 BASE-T Twisted Pair Ports Port 51~52 Understanding LED Indicators Power and System LEDsPower LEDs Ports 1 ~ 48 Status LEDs Link/Act Link/Act for UTP ports Ports 51~52 10/100/1000 Base-T LEDs Link/Act10/100Mbps shown in Amber Light Page Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarOption includes Refresh Time and Group Interval functions Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and termsView trap Device Setting This space has been intentionally reserved for notesFirmware Upgrade Login Web-based ManagementLog in screen Tool Menu Tool MenuSetup Menu Tool Menu Firmware Backup and UploadSystem System Setting C PSystem Trap Setting System System SettingSystem Port Setting System Trap SettingSystem Port Setting System Snmp Setting System Snmp Setting System Password Access Control Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Add VID Configuration Trunking Configuration 802.1Q Vlan VID AssignmentsConfiguration Igmp Snooping Configuration Igmp Snooping ConfigurationPage Page Configuration 802.1D Spanning Tree Configuration Igmp Router port SettingsConfiguration Spanning Tree Page Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority Security Safeguard EngineSecurity 802.1X Setting Security Broadcast Storm ControlSecurity 802.1X Setting Page Security Mac Address Table Static Mac Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Monitoring StatisticsMonitoring Statistics Monitoring Port Statistics