D-Link DES-1200M manual 10Base-T Ethernet Network Guidelines

Page 17

CHAPTER 2 PLANNING YOUR NETWORK

Before you install your DES-1200M, you should review the guidelines for setting up Ethernet networks. Further, you should plan your network to take maximum advantage of its switching capabilities.

10Base-T Ethernet Network Guidelines

The maximum length of a 10Base-T cable segment is 100 meters (328 feet).

The maximum number of nodes on a 10Base-T segment is one (1) for regular 10Base-T.

The recommended cable type is EIA/TIA Category 3 or higher.

The maximum network diameter is 500 meters (1,640 feet) for Ethernet networks.

The maximum number of segments between any two nodes in the network is five.

The maximum number of hubs or repeaters between any two nodes in the network is four.

100Base-TX Fast Ethernet Network Guidelines

The maximum length of a 100Base-TX cable segment is 100 meters (328 feet).

The maximum number of hubs on a 100Base-TX segment is one if using Class I hubs and two if using Class II hubs.

The recommended cable type is EIA/TIA Category 5 untwisted-pair.

13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DES-1200M Fast Ethernet Switch System User’s Guide Planning Your Installation Page Introduction Page Unpacking Package ContentsFront Panel DES-1200M Front and Rear PanelsPower Port Power port accepts the power plug Power Switch DES-128 8 ports 10/100Base-TX Module DES-128 8 Ports 10/100Base-TX Module FeaturesDIP Switch with Link Mode Dip switch location and mode settings LED Indicators DES-121T Gigabit 1000Base-T Switch ModuleDES-121T Gigabit 1000Base-T Switch Module Features Page Port 100Base-TX/FX Front View DES-124F 4 Ports 100Base-FX Fiber ModuleDES-124F 4 ports 100Base-FX Fiber Module Feature DES-121G/GL 1000Base-SX/LX Fiber Module DES-121G/GL 1000Base-SX/LX Fiber Module Features100Base-TX Fast Ethernet Network Guidelines 10Base-T Ethernet Network Guidelines1000BASE-SX and LX Network Guideline 100Base-FX Fast Ethernet Network Guidelines10Base-T Networks Network PlanningExpanded Networks 100Base-TX Networks Expanding your 10Base-T NetworkExpanding your 100Base-TX network Class Collapsed Backbone LinkCollapsed backbones Fileserver Link 100Base SolutionMulti-port Bridge with High-Bandwidth Backbone 1000Base SolutionUsed as a Multiport Bridge Choosing a Location InstallationRack Installation Attaching self-adhesive feet for desktop installationConnecting the Switch Supplying PowerHandling the Modules Module Setup and InstallationInstalling 100Base-FX Modules Installing the ModulesInstalling 10/100Base-TX Modules Removing the Modules Installing 1000Base-SX/LX ModulesDimensions Power Input Voltage FrequencyCompatibility with Ethernet Standards Environment Operating StoragePhysical Characteristics Appendix B. PIN Assignments Are shown below Page FCC Certifications CE Mark Warning Limited Warranty What You Must Do For Warranty Service Page Wichtige Sicherheitshinweise Trademarks Offices Link Europe Registration Card Page

DES-1200M specifications

The D-Link DES-1200M is a cost-effective and efficient solution designed for small to medium-sized businesses requiring reliable network performance. This 12-port Managed Ethernet switch offers a blend of performance and functionality, making it an essential component for robust network infrastructure.

One of the main features of the DES-1200M is its 12 10/100 Mbps Fast Ethernet ports. This ensures adequate data transfer rates needed for everyday networking tasks. The switch supports both store-and-forward switching and wire-speed forwarding, enhancing the overall network performance while minimizing packet loss.

In terms of management capabilities, the DES-1200M provides a web-based graphical interface and Simple Network Management Protocol (SNMP) support. This allows administrators to efficiently monitor and configure the switch settings, ensuring optimal performance and security. The switch also offers port mirroring and network monitoring features, assisting in troubleshooting and performance optimization.

Another standout feature is the support for VLANs, specifically 802.1Q tagging. This technology enables the segmentation of networks into logical groups, improving both security and performance by reducing broadcast traffic. In addition, the DES-1200M supports link aggregation, which allows multiple ports to work together, increasing bandwidth and providing redundancy in case of link failures.

Security is a crucial aspect, and the D-Link DES-1200M doesn't disappoint. It includes features such as IEEE 802.1X port-based network access control, which restricts access to authenticated users only, thus enhancing network security. The switch also supports port security, allowing network administrators to limit the number of MAC addresses that can be connected to each port.

Power over Ethernet (PoE) support further adds to the switch’s utility. By providing power to connected devices such as IP cameras and access points through the Ethernet cable, the DES-1200M eliminates the need for additional power sources, simplifying installation and reducing clutter.

Finally, the D-Link DES-1200M is designed with a sturdy metal chassis that ensures durability and reliability. Its compact design also allows for efficient space utilization, making it a practical choice for various deployment environments.

In summary, the D-Link DES-1200M managed switch offers excellent performance, extensive management features, robust security options, and PoE capabilities. This combination makes it an ideal choice for businesses looking to enhance their network infrastructure while maintaining cost-effectiveness.
Top Page Image Contents