D-Link DES-1008D manual Unpacking, Setup

Page 14

h

Unpacking and Setup

This chapter provides unpacking and setup information for the DES-1008D.

Unpacking

Open the box and carefully unpacks its contents. The box should contain the following items:

?One DES-1008D

?One external power adapter

?This User’s Guide.

If any item is found missing or damaged, please contact your local reseller for replacement.

Setup

The setup for the DES-1008D can be performed using the following steps:

??The surface must support at least 1.5 Kg for the DES-1008D.

??The power outlet should be within 1.82 meters (6 feet) of the DES-1008D.

??Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

??Make sure that there is proper heat dissipation from and adequate ventilation around the DES-1008D. Do not place heavy objects on the DES-1008D.

6

Image 14
Contents Recyclable Limited Warranty Iii What Is Not Covered Disclaimer of Other Warranties Except for the Limited Page FCC Warning Table of C Ontents Overview of this User’s Guide About this GU I D EPurpose Fast Ethernet Technology Switching TechnologyT R O D U C T I O N Page Features Page Setup UnpackingLED Indicators Identifying External ComponentsRear Panel Page Hub to DES-1008D Connecting the DES-1008DPC to DES-1008D DES-1008D to switch other devices Hub without Uplink MDI-II portPort Speed & Duplex Mode RJ-45 P in Specification RJ-45 Connector pin assignmentStandard RJ-45 receptacle/connector Technical Specifications GeneralPhysical and Environmental Performance