Altinex manual Technical Specifications, About Your TNP100-HB

Page 4

DESIGNER SOLUTIONS

Operation of this equipment in a residential area is likely to cause harmful interference

TECHNICAL SPECIFICATIONS

3

in which case the user will be required to correct the interference at his own expense.

Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.

FEATURES/

DESCRIPTION

GENERAL

Front Panel

Standard

Configuration

Connectors

TNP100-HB

Faceplate

Cable end

under table

 

 

 

ABOUT YOUR TNP100-HB

2

The TNP100-HBis designed for installation into a conference room table. The TNP100-HBTilt ‘N

Plug™ Interconnect Box provides a means of connecting audio, video, control, and computer video sources into a presentation system. It is ideal for use together with ALTINEX computer video interfaces. The TNP100-HBTilt ‘N Plug™ Interconnect Box can either pop up and “tilt” to a raised position to provide

Power

Computer Video

Audio

Telephone

Network

Microphone

1 outlet with one circuit breaker

115-pin HD-F

13.5mm stereo female jack

1RJ-11 F (6-position)

1RJ-45-F (8-position)

XLR 4-pin male

receptacle

1 plug with 6ft

cord

115-pin HD-F

13.5mm stereo male plug

1RJ-11-M (6-position) 1 RJ-45-M (8-position) XLR 4-pin female plug

access to the connectors or it can be lowered into a table when not in use. A pneumatic shock inside the TNP100-HB’s tower type construction applies pressure to the panel mechanism, making it easy to raise and secure the unit firmly in an open position. Also, for safety, the chassis of the TNP100-HBis connected to the ground pin of the power plug.

The Tilt ‘N Plug™ Interconnect Box has one input plate on the front panel of the unit. The standard plate offers Computer Video (15-pin HD); Audio (Stereo Mini), Modem (RJ-11), Network (RJ-45) and Microphone (XLR 4-pin) input connections. All signals are passed through to a set of female connectors or cables. Several optional connectors can be substituted for the standard set of connectors. For additional information regarding optional connectors, contact the ALTINEX Sales Department.

The Tilt ‘N Plug™ Interconnect Box is designed for use with tables ranging from one to three inches thick. The Tilt ‘N Plug™ comes in a standard matte black color; however, it can be finished to match the table. This is available on a custom per order basis at an additional charge.

Table 1. TNP100-HBGeneral

MECHANICAL

 

TNP100-HB

 

 

 

Width (inches)

 

6.03in (153mm)

Height (closed)

 

4.79in (122mm)

Height (opened)

 

8.05in (205mm)

Depth (inches)

 

7.56in (192mm)

Finish

 

Flat Black

T° Operating

 

10°C-35°C

T° Maximum

 

50°C

Humidity

 

90% non-condensing

Table 2. TNP100-HBMechanical

ELECTRICAL

 

 

TNP100-HB

 

 

 

Power

 

 

 

Power Rating (pass through

 

90-140 VAC, 5Amps

connector)

 

 

Max

Table 3. TNP100-HBElectrical

 

3

Image 4
Contents TNP100-HB Table of Contents Precautions / Safety Warnings InstallationCleaning GeneralTechnical Specifications About Your TNP100-HBTNP100-HB Dimensions Description Diagram Application DiagramDiagram 4 Final Installation Diagram 5 Table Cutout Requirements Installation Cable ClampOperation Frequently Asked Questions FAQ No QuestionAccessories Troubleshooting GuideLimited Warranty Altinex PolicyReturn Policy Contact Information ALTINEX, INC