DESIGNER SOLUTIONS
2.[CLR]
This command resets the
Command Format: [CLR] Example:
Clear the
3.[VER]
This command displays the model number, firmware version, and unit ID.
Command Format: [VER] Example:
Send the command [VER], and the
U0 | = the unit ID |
4.[ONmX]
This command turns on one or more outputs. Command Format: [ONmX]
m = Output No. (m = 1 or 2)
X = Channel No. (X = A, B, or blank for both) Example:
Turn on Output 1A by sending [ON1A] to the
Turn on Outputs 2A and 2B by sending [ON2] to the
5.[ON]
This command turns on all outputs. Command Format: [ON] Example:
Send [ON] to the
6.[OFFmX]
This command turns off one or more outputs. Command Format: [OFFmX]
m = Output No. (m = 1 or 2)
X = Channel No. (X = A, B, or blank for both) Example:
Turn off Output 1A by sending [OFF1A]. Outputs 1B, 2A, and 2B are unaffected.
Turn off Outputs 2A and 2B by sending [OFF2]. Outputs 1A and 1B are unaffected.
7.[OFF]
This command turns off all outputs. Command Format: [OFF] Example:
Send [OFF] to the
8.[InOmX]
This command connects one input to one output.
Command Format: [InOmX]
n = Input No. (m = # from 1 to 8) m = Output No. (m = 1 or 2)
X = Channel No. (X = A, B, or blank for both) Example:
Connect Input 7 to Outputs 1A and 1B and then Input 6 to Output 2A by sending the commands [I7O1] and [I6O2A]. The first command connects Input 7 to both channels of Output 1. The second command connects Input 6 to Output 2 Channel A only.
15 |