Technicolor - Thomson DPL4000 manual Using the receiver to play a source

Operating your Receiver

Example 2:

Based on example 1, the VCR input is selected. If SAT is selected, image and sound from the SAT source will replace the VCR.

Using the receiver to play a source

After having properly connected a source (DVD, CD, VCR) to the receiver, you can partly control them through the receiver.

BAND TUN

SOURCE

NOTE

Remote control selector must be on vcr/sat to operate SAT features.

You can connect up to 8 audio/video sources to this amplifier:

Source	Corresponding connector
	(receiver back panel)
- DVD	DVD IN (audio / video)
- SAT	SAT IN (audio / video)
- VCR	VCR IN/OUT (audio / video)
- V-AUX	V-AUX IN (audio / video)
- CD	CD IN (audio only)
- TV	TV IN (audio only)
- TAPE	TAPE IN/OUT (audio only)
- TUNER	built-in
- 6 CH	6 CH INPUT

When a source is selected, the arrow will point to the source name on the display.

Example: Press DVD to select DVD as the source to the amplifier.

NOTE

1.Your receiver has a built in tuner. Just con- nect the appropriate antenna on the back of the receiver and you will be able to listen to radio stations. (See details in Tuner section)

2.Other sources can be connected to the above standard source. Example: you can con- nect a LD into the DVD inputs.

3.Refer to the "Connecting To Audio-Visual Components" section for details on connec- tion.

Playing a DVD with the receiver

1.Connect a DVD player to the receiver (see con- necting your receiver for details)

NOTE

To play Dolby Digital or DTS sound, the source must be connected to the receiver via the opti- cal or coaxial terminal.

2.Press ON/ECO to enter Standby mode then press SOURCE buttons on the front panel or ON/OFF button on the remote control to switch on the receiver

3.Select the DVD source.

4.Switch ON the DVD player and start playback

5.Switch ON your TV

6.Select the appropriate A/V channel on the TV (refer to your TV manual for details) until the image from the DVD player is displayed

7.Set the sound Mode if needed (see "Advanced sound control" for details)

Example 1:

To play 5.1 Dolby Digital surround sound

Press SURR. MODE button until "Dolby Digital" appears on the Display and all of the speaker'’ icons light up.

Example 2:

DVD: You may also need to select the Dolby Digital

5.1on the DVD disc menu to have the digital sur- round enabled providing that the disc is encoded with Dolby Digital 5.1 (please refer to the DVD player and DVD disc instruction)

Example 3:

LD: You may need to select a different Audio Channel on your LD (refer to your LD player manu- al)

8. Adjust volume knob accordingly

14