Technicolor - Thomson DPL4000 Operating the Radio, Manual tuning, Selecting Mono or Stereo Sound

Operating your Receiver

Operating the Radio

The receiver has a built-in tuner that allows for FM/MW/LW radio function.

NOTE

The remote control selector must be set on hifi.

5- Tune the stations by pressing TUNING UP or DOWN on the main unit or REV or FWD on the

remote control repeatedly until the desired station is EN found.

Alternatively, you can press and hold the respective buttons for about one second to activate the automatic SEARCH function. In this mode the receiver will automatically tune frequencies until it finds a station

Manual tuning			BAND	TUNING MEMORY
			E	OK
1. Connect the FM and AM antenna accordingly (see				OPEN/CLO
"Connecting the Antenna" on page 5 section for
details)
2. Press SOURCE	or	keys on the main unit	NOTE
to switch on the receiver from Standby Mode.
BAND	TUNING		1.	If there is interference, modify the location
SOURCE			of the antenna until the optimal sound is heard.
			TV and other electronic devices could be the
			cause of interferences so try to position the
			antenna away from them.
3. Press SOURCE	or	keys on the main unit	2. Weak signal can affect the "auto Search
			function". Adjust the antenna for better recep-
or tuner on the remote control to enter TUNER			tion for more efficient search.
mode.
			Select sound effect if needed by pressing Preset EQ or
BAND	TUN		DSP sound (see "Advance sound section" for details).

SOURCE

4- To select band, press the BAND button on the main unit or tuner on the remote control to toggle between FM/MW/LW mode.

Selecting Mono or Stereo Sound

Press ST/M on the main unit or the DIGITAL button on the remote control to toggle between mono and stereo sound in FM tuner mode (when available).

SETUP TEST TONE EQ DIGITAL INPUT
ST/M	SURR. MODE	DPS MODE

BAND TUNING MEMOR

SOURCE

15