Precautions / Safety Warnings

SWITCHERS

Please read this manual carefully before using your MX2226AT Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2226AT and to prevent fire and shock hazard. Please read them carefully and heed all warnings.

1.1 GENERAL

•Unauthorized personnel shall not open the unit since there are high-voltage components inside.

•Qualified ALTINEX service personnel, or their authorized representatives must perform all service.

1.2SAFETY GUIDELINES FOR THE RACK- MOUNTING OF THE MX2226AT

•Maximum operating ambient temperature is 35 (degrees C).

•Never restrict the airflow through the device’s fan or vents.

•When installing equipment into a rack, distribute the units evenly. Otherwise, hazardous conditions may be created by an uneven weight distribution.

•Connect the unit to a properly rated supply circuit.

•Reliable Earthing (Grounding) of Rack- Mounted Equipment should be maintained.

1.3 INSTALLATION

•For best results, place the MX2226AT Switcher on a flat, level surface in a dry area away from dust and moisture.

•To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the MX2226AT Switcher in direct sunlight, near heaters or heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.

•Dropping or jarring can damage internal components, so handle the MX2226AT Switcher carefully.

•Do not place heavy objects on top of the MX2226AT. If the MX2226AT is to be mounted to a table or wall, use only ALTINEX made DA1292FC 1U High Rack Mount and cables for optimum setup.

•To turn off the main power, be sure to remove the cord from the power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

•Do not pull the power cord or any cable that is attached to the MX2226AT Switcher.

•If the MX2226AT Switcher is not used for an extended period, disconnect the power cord from the power outlet.

1.4 CLEANING

•Unplug the MX2226AT power cord before cleaning. Clean surfaces with a dry cloth. Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the unit.

1.5 FCC / CE NOTICE

•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

•This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

MX2226AT specifications

The Altinex MX2226AT is a sophisticated audio-visual switcher designed to meet the demands of professional audio-visual environments. It serves as an essential component for managing multiple video sources, allowing users to easily switch between devices for seamless presentations and conferences.

One of the standout features of the MX2226AT is its capability to handle up to six inputs and two outputs. This flexibility enables users to connect a variety of sources, including computers, projectors, and displays, ensuring comprehensive connectivity for any setup. The switcher supports multiple video formats, including VGA, Composite, S-Video, and Component, making it highly versatile for different audio-visual equipment.

The MX2226AT is equipped with advanced switching technology. The device utilizes a sophisticated matrix switching system that allows for not only straightforward input-output routing but also provides the ability to send any input to any output. This feature is particularly beneficial in complex setups where different video signals are needed at various output locations.

Another notable aspect of the MX2226AT is its user-friendly interface. The front panel features intuitive buttons for quick access to input selection, along with LED indicators that provide real-time feedback on the active inputs and outputs. Additionally, the switcher offers remote control capabilities, giving users the option to manage their media sources from a distance, which is ideal for dynamic presentations.

In terms of compatibility, the MX2226AT employs both analog and digital technologies, allowing integration with a wide range of devices. The switcher also includes integrated scaling functionality, ensuring that video resolutions are appropriately adjusted for optimal display quality, regardless of the original resolution of the source.

Built with reliability in mind, the MX2226AT features robust construction suitable for installation in a variety of environments, from boardrooms to lecture halls. Its durable design helps to maintain consistent performance during prolonged usage, ensuring that users can depend on the unit for critical presentations.

In summary, the Altinex MX2226AT is a powerful and versatile audio-visual switcher, ideal for environments requiring efficient management of multiple video sources. Its advanced features, user-friendly interface, and compatibility with various formats make it a valuable asset for professionals seeking to enhance their audio-visual setups.