∙When DC/USB power cable is connected to AEBK07FS for charging, AEBK07FS will go into standby mode after it is idle for 60 seconds. Press the [Power] button to start AEBK07FS.
∙The battery status is displayed at the bottom left corner. The remaining battery playback time is displayed right next to the battery icon.
Getting Started
Inserting Memory Card
AEBK07FS supports SD/SDHC/MMC card in both FAT and NTFS file system. NTFS is needed to copy file with size larger than 4GB.
To insert a Memory card:
∙Open the SD cover.
∙Check that the SD card is in the correct position with the contact pin facing upwards as illustrated below. You may damage the card and AEBK07FS if SD card is not inserted in the right orientation.
∙Push the SD card into the card slot until it clicks.
∙To remove SD card, push the SD card once again until it clicks.
∙When a SD card is inserted in or ejected from AEBK07FS, it may take few seconds for AEBK07FS to update the content.
∙Please avoid inserting or ejecting SD card when other operation is running.
∙Do not remove the card if the content inside the card is being played. This will halt the operation of AEBK07FS and cause AEBK07FS to restart.