Allied Telesis x908, X900-12XT/S manual Destination-ip-address

Page 4

Creating hardware ACLs

IP packets You can filter IP packets on the basis of their source and/or destination IP addresses. The command syntax is:

awplus(config)#access-list <3000-3699> <action> ip <source-ip-address>

<destination-ip-address>

The source and destination IP addresses can be any of the following:

za subnet. To specify this, enter the address and mask. You can specify the mask in slash notation or with a wildcard (reverse) mask:

awplus(config)#access-list 3000 permit ip 192.168.0.0/16 ...

awplus(config)#access-list 3000 permit ip 192.168.0.0 0.0.255.255 ...

za single host. To specify this, enter the keyword host and then the address:

awplus(config)#access-list 3000 permit ip host 192.168.0.1 ...

zall source IPs or all destination IPs. To specify this, enter the keyword any:

awplus(config)#access-list 3000 permit ip any ...

ICMP packets You can filter ICMP messages on the basis of:

zsource IP address and/or destination IP address (using the same syntax as when filtering IP packets)

zICMP message type, by specifying a type number. Popular types to filter include Echo Reply (0), Echo Request (8), Redirect (5), Destination Unreachable (3), Traceroute (30), and Time Exceeded (11)

The command syntax is:

awplus(config)#access-list <3000-3699> <action> icmp

<source-ip-address><destination-ip-address>[icmp-type <value>]

For example, the following ACL matches on all ICMP messages from 192.168.0.0/16:

awplus(config)#access-list 3000 permit icmp 192.168.0.0/16 any

For example, the following ACL matches on ICMP redirect messages to and from any address:

awplus(config)#access-list 3000 permit icmp any any icmp-type 5

Page 4 AlliedWare Plus™ OS How To Note

Page 3 Page 5
Image 4
Page 3 Page 5
Contents AlliedWare PlusTM OS Which products and software version does this Note apply to? Creating hardware ACLs Creating IP hardware ACLsDestination-ip-address TCP and UDP You can filter TCP and UDP packets on the basis Effects of the action keywords in ACLs Creating MAC address hardware ACLsMaking filters by applying hardware ACLs to ports ACLsMaking filters by using QoS class-maps Creating a class-map Specifying what the class-map will match onMatching on inner keywords for nested VLANs So will the following single match command Matching on TCP flagApplying the policy-map to ports Applying the class-maps to a policy-mapMatching on eth-format and protocol Logic of the operation of the hardware filters Combining interface ACLs and QoS class-mapsExamples Blocking all multicast trafficBlocking all multicast traffic except one address Mirroring Http and Smtp trafficMirroring ARP packets Blocking TCP sessions in one direction This example uses two QoS class-mapsHow many filters can you create? Filter rules tableProfile mask Are there enough bytes for your set of filters? Some protocols also use filters, so use some of the length
Related manuals
Manual 8 pages 39.31 Kb Manual 52 pages 56.44 Kb

X900-12XT/S, x908 specifications

The Allied Telesis x908 and the SwitchBlade x900 series of network switches are cutting-edge solutions designed to address the demands of modern networking environments. These switches are known for their high performance, reliability, and robust feature sets, making them ideal for enterprise and service provider networks.

The Allied Telesis x908 series consists of modular and chassis-based systems that can accommodate a variety of network configurations. One of the main features of the x908 series is its ability to offer high scalability with support for a large number of ports. This makes it suitable for data centers and large enterprise networks where space and bandwidth optimization are critical.

In addition to scalability, the x908 series supports advanced Layer 2 and Layer 3 switching capabilities. This allows for efficient traffic management and routing, ensuring that data is delivered swiftly and reliably. The x908 also incorporates intelligent features such as Quality of Service (QoS), which prioritizes critical network traffic, ensuring that time-sensitive data—like voice and video—maintains its quality during transmission.

The SwitchBlade x900 series takes this functionality further with its innovative modular architecture. This allows organizations to configure their networks to meet specific needs by choosing from a variety of interface cards and service modules. The SwitchBlade x900 also supports advanced security features such as Access Control Lists (ACLs) and VLAN segmentation, which provide enhanced protection against unauthorized access and network threats.

Another hallmark of the x908 and SwitchBlade series is their support for high-speed Ethernet technologies, including 10G and 40G Ethernet. This enables organizations to keep pace with the increasing bandwidth demands of applications and services, particularly in cloud computing and data-intensive workloads.

Both the x908 and the SwitchBlade x900 series are designed with energy efficiency in mind, featuring power-saving technologies that reduce overall operational costs. Coupled with Allied Telesis' management tools, which provide detailed analytics and monitoring, network administrators can optimize performance and energy consumption simultaneously.

In summary, the Allied Telesis x908 and SwitchBlade x900 series offer a comprehensive suite of features, high performance, scalability, and advanced networking technologies. They represent a strategic investment for organizations looking to build resilient, efficient, and future-proof network infrastructures.
Top Page Image Contents