Allied Telesis AT-GS950/48 Cabling and Powering On the Switch, Connecting Twisted Pair Cables

Page 44

Chapter 2: Installation

Cabling and Powering On the Switch

Connecting the

Twisted Pair

Cables

To connect the twisted cables to the RJ-45 ports on the AT-GS950/48 Gigabit Ethernet Smart switch, perform the following procedure:

Note

If you plan to configure a redundant data path, make sure that the Spanning Tree feature is enabled via the AT-S106 Management Software before connecting the ethernet cables for your secondary network connections.

1.Plug the twisted pair data cables to the RJ-45 ports on the switch, as shown in Figure 13.

1750

Figure 13. Connecting the Twisted Pair Data Cables

When you connect a twisted pair cable to a port, observe the following guidelines:

ˆAn RJ-45 connector should fit snugly into the port on the switch. The tab on the connector should lock the connector into place.

ˆThe ports on the switch are auto-MDI/MDI-X. You can use either a straight-through or crossover twisted pair cable to connect any type of network device to a port on the switch.

ˆThe network should not contain data loops, which can adversely affect network performance. A data loop exists when two or more network devices can communicate with each other over more than one data path.

2.Connect the other end of the twisted pair cable to a port in the end node.

44

Image 44
Contents Installation Guide Page Electrical Safety and Emissions Standards Translated Safety Statements Contents Page Figures Figures Tables Tables Preface Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Contacting Allied Telesis Management Software Updates Preface Overview ChapterFeatures Front and Back Panels AT-GS950/48 Front and Back PanelsPorts Uplink Combo PortsEco-friendly Switch Action ResultsLEDs State DescriptionLED Power Supply Ethernet Switching Basics MAC Address TableDuplex Mode Store Forward Page Overview Installation Reviewing Safety Precautions Page Selecting a Site for the Switch Cable Specifications Speed Type of Cable Operating DistanceUnpacking the Switch Installing the Switch on a Desktop Installing the Switch on a Wall Positioning and Drilling Holes for Wall Installation Positioning the Switch onto the Wall with Mounting Screws Installing the Switch in a Rack 1748 1749 Installing an SFP Transceiver 1752 Cabling and Powering On the Switch Connecting Twisted Pair CablesConnecting Fiber Optic Cables Powering On the Switch Starting a Management Session Installation Troubleshooting Troubleshooting Technical Specifications Physical SpecificationsEnvironmental Specifications Power SpecificationsSafety and Electromagnetic Emissions Certifications Network Protocol and Standards CompatibilityConnectors and Port Pinouts Pin SignalPin Pair Signal Cleaning Fiber Optic Connectors Appendix BUsing a Cartridge-Type Cleaner Rubbing the Ferrule Tip on the Cleaning SurfacePage Using a Swab Cleaning a Recessed Ferrule If desired, repeat stepPage Appendix B Cleaning Fiber Optic Connectors
Related manuals
Manual 2 pages 50.79 Kb

AT-GS950/48 specifications

The Allied Telesis AT-GS950/48 is a robust and high-performance managed Gigabit Ethernet switch designed to meet the demands of modern networks. Ideal for small to medium-sized businesses and enterprise environments, this switch delivers flexible, reliable, and high-speed connectivity while ensuring ease of management.

One of the standout features of the AT-GS950/48 is its offering of 48 Gigabit Ethernet ports, allowing for extensive connectivity options. These ports support auto-negotiation and can automatically detect the highest speed supported by connected devices, ensuring optimal performance. The inclusion of 4 additional SFP (Small Form-factor Pluggable) ports enhances the flexibility of the network design. These SFP ports enable fiber connections, making it easy to extend the network over longer distances or connect to different types of media.

The switch supports advanced Layer 2 features, including VLAN (Virtual Local Area Network) support, which allows network administrators to segment network traffic for enhanced security and performance. The AT-GS950/48 also incorporates features such as Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) that prevent loops in the network and promote redundancy, ensuring uninterrupted service even in complex networking environments.

Additionally, the AT-GS950/48 supports Power over Ethernet (PoE), which enables the switch to deliver power to connected devices such as IP cameras, VoIP phones, and wireless access points through the Ethernet cable, reducing the need for additional power sources. This PoE capability allows for easier installation and flexibility in deploying network devices.

Allied Telesis places a strong emphasis on security, and the AT-GS950/48 reflects this commitment with features like IEEE 802.1X authentication, which secures network access by allowing only authorized users to connect. The switch also provides access control lists (ACLs) to enhance security by filtering traffic based on various criteria.

With built-in web-based management, the AT-GS950/48 enables administrators to easily configure, manage, and monitor the switch through an intuitive interface. It also supports SNMP (Simple Network Management Protocol) for integration into existing network management systems.

In summary, the Allied Telesis AT-GS950/48 combines high port density, advanced networking features, power delivery capabilities, and robust security measures, making it an excellent choice for organizations looking to build a resilient and efficient network infrastructure.