AT-FS708LE Installation Guide
Standards: This product meets the following standards:
U.S. Federal Communications Commission
DECLARATION OF CONFORMITY
Manufacture Name: | Allied Telesyn, Inc. |
Manufacture Address: | 950 Stewart Drive, Suite B |
| Sunnyvale, CA 94085 USA |
Manufacture Telephone: | |
Declares that the product: | Fast Ethernet Switch |
Model Number: |
|
This product complies with FCC Part 15, Class B Limits:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission rules.
37