Allied Telesis 54266-02 manual PCR 40419 Module OSPF, IPGLevel, PCR 40442 Module IPSECLevel

Page 3

Patch 54266-02

3

PCR: 40419 Module: OSPF, IPGLevel: 2

If OSPF was configured using the command set ospf dyninterface=stub, to advertise dynamic interfaces such as PPPoE interfaces as stub links, the links were not being advertised as expected. This issue has been resolved.

PCR: 40442 Module: IPSECLevel: 2

When an IPSEC policy is used on a PPP link with iprequest=on, when the

PPPlink goes down and IPSEC has traffic to transmit, IPSEC repeatedly attempts to activate the PPP link again. The frequency of the reactivation attempts has been reduced.

PCR: 40446 Module: DHCP

Level: 2

In certain situations, if a DHCP client used a DHCP relay agent to request IP addresses from the router acting as the DHCP server on a different subnet, it was not be able to renew the IP address allocated to it. This issue has been resolved.

PCR: 40450

Module: IPG

Level: 2

IGMP entries were sometimes changed to static entries rather than being deleted when IGMP leaves were received. This issue has been resolved.

PCR: 40451

Module: FIREWALL

Level: 2

The "number of hits" counter in firewall's application rules was not

incremented correctly. This issue has been resolved.

 

PCR: 40453

Module: PIM

Level: 2

Particular IP packets (unicast destination IP, but multicast destination MAC) could result in a memory leak, which in some cases could cause the device to stop responding to the command line. This issue has been resolved.

PCR: 40456

Module: IPG

Level: 2

The enable switch learning command would fail if 802.1X port authentication was enabled on any of the switch ports. This issue has been resolved.

PCR: 40458

Module: IPG

Level: 2

The router was accepting network RIP packets from foreign subnets. This issue has been resolved.

PCR: 40465

Module: PIM6, PIM4

Level: 2

The router could reboot when a user changed the Rendezvous Point

Candidate (RPC) priority in the PIM6 module. This issue has been resolved.

Patch 54266-02

C613-10417-00 Rev B

Page 2 Page 4
Image 3
Page 2 Page 4
Contents For AR440S and AR441S Adsl Routers Introduction PatchPCR Module IPG Level FeaturesPCR 40660 Module ATM Level PCR Module Ipsec LevelPCR Module PIM6, PIM4 Level PCR 40419 Module OSPF, IPGLevelPCR 40442 Module IPSECLevel PCR 40446 Module Dhcp LevelPCR 40496 Module Dhcp Level PCR Module Isakmp LevelPCR Module BGP Level PCR Module Ospf LevelPCR 40573 Module LOG Level PCR 40592 Module Bootp LevelPCR Module SWI Level PCR 40560 Module Dhcp LevelPCR Module Ffile Level PCR Module Ping LevelPCR Module OSPF, IPG Level PCR Module L2TP LevelPCR Module PIM6 Level PCR Module IP, Filter LevelPCR 40437 Module Core Level PCR 40493 Module Dhcp LevelPCR Module Adsl AR441S Adsl Router Hardware PlatformPCR Module IPG, Vrrp Level PCR 40521 Module TACACS+Adsl Interfaces PCR 40582 Module BRG Level PCR 40568 Module SWKLevelPCR Module M8272 Level PCR 40581 Module BRG LevelError 3005271 Internal Error Failed to set interface PCR Module SYN Level PCR 40625 Module SWK LevelPCR 40633 Module Enco Level PCR 40647 Module ETHLevel Features

54266-02 specifications

The Allied Telesis 54266-02 is a feature-rich networking device designed to meet the demands of modern enterprise environments. This device is part of Allied Telesis's commitment to providing robust networking solutions that enhance connectivity, simplify management, and improve overall performance.

One of the standout features of the 54266-02 is its high-performance capabilities. This model supports Gigabit Ethernet, which ensures that data can be transmitted at rapid speeds, thereby accommodating bandwidth-intensive applications such as video conferencing, cloud computing, and online gaming. With its ability to handle substantial traffic without compromising on efficiency, this device is ideal for both small businesses and large enterprises.

The 54266-02 is equipped with advanced Layer 2 and Layer 3 switching capabilities, providing users with a versatile platform that can efficiently manage network traffic. This dual-layer functionality allows for greater flexibility in network design and optimization. Additionally, the device supports Virtual LAN (VLAN) configurations, enabling the segmentation of network traffic for enhanced security and improved performance.

In terms of management, the Allied Telesis 54266-02 features a user-friendly interface that simplifies network administration. With the support for SNMP (Simple Network Management Protocol) and web-based management tools, IT administrators can easily monitor network performance, configure settings, and troubleshoot issues in real-time. This enhances overall network reliability and minimizes downtime.

Security is another critical aspect of the 54266-02. It is integrated with numerous security protocols, including Access Control Lists (ACLs) and IEEE 802.1X port-based network access control. These technologies ensure that unauthorized users are kept out of the network, protecting sensitive data from potential breaches.

Furthermore, the device is designed with scalability in mind. It can accommodate future growth in network traffic without the need for significant hardware changes, making it a cost-effective solution for organizations looking to expand their operational capabilities.

With its combination of speed, flexibility, ease of management, and robust security features, the Allied Telesis 54266-02 is a powerful choice for any organization seeking to enhance their networking infrastructure. Whether for a startup or an established enterprise, this model represents a reliable solution that can adapt to evolving networking demands.
Top Page Image Contents