Installation
Brackets
Caution: Use only the hardware provided to install the KVM Rack LCD in the rack.
1. Attach the left and right mounting rails to the inside of the rack. The flange that supports the KVM Rack LCD station will be to the inside.
– Screw the front flanges to the rack first.
2. Slide the bars with the rear flanges toward the rack until the flanges make contact with the rack then screw the rear flanges to the rack.
3. Slide the KVM Rack LCD () onto the support flanges (). Use the screws () supplied to loosely attach the front of the KVM Rack LCD to the front of the rack.
– Do not fully tighten the screws at this time.
na0347a
6 | Rack LCD Console KVM Switch User’s Manual |