ATEN Technology CS-228 user manual F5 Settings, F6 Set

Page 20

(F5 Settings cont.)

Setting

Function

RELEASE ALL PRIVATE

Releases all Ports that have been set to Private Mode (see Private

 

Mode, p. 17), so that they become accessible to all Consoles.

 

 

SET LOGOUT TIMEOUT

If a Console that has accessed a computer isn’t used for the amount

 

of time set with this function, the Operator is automatically logged

 

out. A login is necessary before the Console can be used again. This

 

enables the other Console to gain access to the computers when the

 

original Console is no longer accessing them, but the Operator has

 

forgotten to relinquish access. To set the timeout value, key in a

 

number from 1 - 255 minutes, then press [Enter] If the number is 0

 

[zero], this function is disabled.

wF6 Set:

[F6] allows you to configure the OSD settings for the Console you are working at. To change a setting:

1.Double Click it; or move the highlight bar to it, then press [Enter]

2.Press [Esc] to activate it.

After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is. The settings are explained in the table below:

Setting

Function

OSD ACTIVATING

Selects which Hotkey activates the OSD function: [Ctrl] [Ctrl] (the

HOTKEY

default) or [Scroll Lock] [Scroll Lock]. The Scroll Lock option is

 

provided in case the Ctrl key combination conflicts with programs

 

running on the computers.

 

 

CHANNEL DISPLAY

Selects how the Port ID is displayed: the Port Number plus the

MODE

Name (PN + NAME); the Port Number alone (PN); or the Name

 

alone (NAME).

 

 

CHANNEL DISPLAY

Determines how long a Port ID displays for after a port change has

DURATION

taken place. The choices are: User Defined - which lets you select

 

the amount of time that the Port ID displays for after a port change

 

has taken place (from 1 - 255 sec.); and Display Always On - which

 

displays the Port ID at all times. If you select User Defined, key in

 

the number of seconds, then press [Enter]. The default is 3 Seconds.

 

 

16

CS-228 User Manual

2001-02-01

Image 20
Contents CS-228 2001-02-01 Packing List Contents Overview Features Computer Connector Type CS Custom Cable Hardware RequirementsConsoles ComputersM Reset Power LEDIntroduction Front ViewConsole 2 Microphone and Speaker Jacks Power Switch Power JackRear View Before you Begin Installation and StartupSingle Station Installation Two Stage Installation Pattern IndicationPage Powering Off and Restarting OperationHot Plugging Port SelectionOSD Operation OSD OverviewPort Numbering OSD NavigationOSD Main Menu Headings OSD FunctionsF1 Help Heading ExplanationChoice Meaning F2 EditF3 List F4 Scan F5 ADMSetting Function SET PasswordF5 Settings F6 SetSetting FunctionFactory Default Settings Setting DefaultF7 QV F8 OutTroubleshooting Symptom Possible Cause ActionAppendix Master View Computer Connection TablesSpecifications Function SpecificationRack Mounting Stacking and MountingStacking Radio & TV Interference Statement Limited Warranty