Stacking and Mounting
wStacking:
1.The unit comes with the stacking brackets already attached. Note that there is a top and bottom half to each bracket. The top half has a convex surface; the bottom half has a concave surface.
2.Line up the four bottom brackets of the top unit with the four top brackets of the bottom unit; then fit the top unit down onto the bottom unit.
wRack Mounting
To rack mount the unit do the following:
1.First remove the stacking brackets by unscrewing them from the unit, as shown in the diagram below:
2. Screw the mounting brackets into the sides of the unit, as shown in the diagram below:
3. Slide the unit into the rack and secure it to the rack.
21 |