ATEN Technology KVM CS-62 user manual Installation

Page 7

Installation

1.Before you begin, make sure that power to all the

devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer.

2.To prevent damage to your installation due to ground potential difference, make sure that all devices on the installation are properly grounded.

Refer to the Installation diagram on the next page as you perform the following steps:

1.Plug your keyboard, monitor, and mouse into the appropriate Console ports of the CS-62. Each port is labeled with an appropriate icon to indicate itself.

2.Plug the keyboard, monitor, and mouse connectors of the attached KVM cables into their respective ports on the computers you are installing.

3.Turn on the power to the computers.

Note: The CS-62’s Power On default is to link to the first computer you turn on.

- 5 -

2003-06-20

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CS-62 2003-06-20 Overview Features Cables Hardware RequirementsConsole ComputersPort LEDs Front ViewInstallation 2003-06-20 Operation Auto Scan ModeSelecting the Active Port Changing the Scan Interval LED Display TableFunction Specification SpecificationsSymptom Possible Cause Action TroubleshootingSymptom Possible Cause Action Limited Warranty 2003-06-20 2003-06-20
Top Page Image Contents