ATEN Technology ACS-1208A user manual F4 ADM

ACS-1208A / ACS-1216A User Manual

F4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices for you to select from appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice so that you know which one it is. The settings are explained in the following table:

Setting		Function
SET	This function is used to set Usernames and Passwords for the
USERNAME	Administrator and Users:
AND
PASSWORD	1.	One Administrator and four User passwords can be set.
	2.	After you select the Administrator field or one of the User fields,
		a screen that allows you to key in the password appears. The
		password may be up to 15 characters long, and can consist of
		any combination of letters and numbers (A - Z, 0 - 9).
	3.	For each individual, key in the Username and Password, then
		press [Enter].
	4.	To modify or delete a previous Username and/or Password,
		use the backspace key to erase individual letters or numbers.
	5.	As a security precaution, you shoud fill in a Username and
		Password for all four Users.
SET LOGOUT	If there is no input from a console for the amount of time set
TIMEOUT	with this function, the Operator is automatically logged out. A
	login is necessary before the console can be used again.
	This enables other Operators to gain access to the computers
	when the original Operator is no longer accessing them, but
	has forgotten to log out. To set the timeout value, key in a
	number from 1 - 180 minutes, then press [Enter]. If the
	number is 0 [zero], this function is disabled. Default is 0
	(disbabled).

(Table continues on next page)

4-8

2003-06-20