ATEN Technology ACS-1208A user manual SET Quick, View Ports, Accessible

ACS-1208A / ACS-1216A User Manual

(F4 ADM: continued)

Setting	Function
SET QUICK	This function lets the Administrator select which Ports to
VIEW PORTS	include as Quick View ports.
	w To select/deselect a port as a Quick View Port, Double Click the
	port you want, or use the Navigation Keys to move the highlight
	bar to it, then press [Enter].
	w When a port has been selected as a Quick View Port, an
	arrowhead displays in the QV column of the LIST on the Main
	Screen to indicate so. When a port is deselected, the
	arrowhead disappears.
	w If one of the Quick View options is chosen for the LIST view
	(see F2 LIST, p. 4-5), only a Port that has been selected here
	will display on the List.
	w If one of the Quick View options is chosen for Auto Scanning
	(see SCAN/SKIP MODE, p. 4-7), only a Port that has been
	selected here will be Auto Scanned.
	The default is for no ports to be selected.
SET	This function allows the Administrator to define access to the
ACCESSIBLE	computers on the installation on a Port-by-Port basis for each
PORTS	User.
	For each User, select the target Port; then press the
	[Spacebar] to cycle through the choices: F (Full access), V
	(View Only), or blank. Repeat until all access rights have been
	set, then press [Enter]. The default is F for all users on all
	Ports.
	Note: A blank setting means that no access rights are
	granted. The Port will not show up on the User’s LIST on the
	Main Screen.

(Table continues on next page)

4-10

2003-06-20