Linksys PC22604 manual Enabling or Disabling Slip, Specifying a Slip Address

Page 18

ProConnect II® Series

3.Press the Enter key. If you highlight Default Setup String, you will return to the Console Port Configurations screen and the default modem string will appear in the Modem Setup String field. If you highlight Custom Setup String, enter the custom string in the Enter Modem Setup String screen and press Enter again. You will return to the Console Port Configurations screen and the custom setup string will appear in the Modem Setup String field.

Enabling or Disabling SLIP

1.From the Console Port Configurations screen, highlight SLIP and press the Enter key. A screen similar to the following will show the current SLIP setting.

2.Highlight Enabled or Disabled to either enable or disable SLIP, then press Enter.You will return to the Console Port Configurations screen and the selected SLIP option will appear in the SLIP field.

Note: if you enable SLIP, a warning window will appear telling you to disable SLIP if you encounter problems. By enabling SLIP, the switch cannot be directly accessed through the console port with the provided serial cable.

Specifying a SLIP Address

If you enabled SLIP, use the following procedure to enter an address that has a network part different than the network address of the Switch (for more information, contact your network administrator).

1.From the Console Port Configurations screen, highlight SLIP Address and press Enter. The following screen (see next page) will appear.

Layer 2 Management 4-Port Gigabit Ethernet Switch

2.Enter the SLIP address. The address consists of numbers separated by periods (e.g., 192.168.1.105).

3.After you enter the SLIP address, press the Enter key. You will return to the Console Port Configurations screen and your entry will appear in the SLIP Address field.

Specifying a SLIP Subnet Mask

If you are using SLIP, enter a suitable SLIP subnet mask.

1.From the Console Port Configurations screen, highlight SLIP Subnet Mask and press Enter. The Enter IP Subnet Mask screen will appear.

2.Enter the SLIP subnet mask. The subnet mask consists of numbers sepa- rated by periods (e.g., 255.255.255.0).

3.After you enter the SLIP subnet mask, press the Enter key. You will return to the Console Port Configurations screen and your entry will appear in the SLIP Subnet Mask field.

Returning to the Basic Management Screen

After completing the general management activities, press the Esc key to exit the Console Port screen and return to the Basic Management screen. You can then select another option from the Basic Management screen or press Esc to return to the Switch Management screen.

26

27

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Layer 2 Management 4-Port Gigabit Ethernet Switch Copyright & Trademarks Table of Contents Default Vlan Introduction Snmp and Rmon Management 106RJ-45 Ports Getting to Know the SwitchLEDs Gigabit Expansion PortsFast Ethernet Considerations Installing the SwitchPositioning the Switch Full-Duplex ConsiderationsRack-Mounting the Switch Desk Top or Shelf Mounting the SwitchInstallation is complete Powering On and Resetting the SwitchInstalling the Gigabit Expansion Modules Switch ManagementUplinking the Switch Local Console ManagementLogging On to the Switch Configuring the SwitchAssigning an IP Address to the Switch Remote Console ManagementGeneral Management Configuration Basic Management ActivitiesChanging the System Name Changing the Administration Password Changing the ContactChanging the Location Changing the Guest Password Statistic CollectionRemote Http Login Reboot-on-ErrorRemote Telnet Login Returning to the Basic Management ScreenLAN Port Configuration Control Setting the Line SpeedChanging the Speed and Flow Control Changing the Flow Control Console Port ConfigurationAdmin Control Displaying Physical Port AddressSelecting a Flow Control Method Specifying a Modem Setup StringChanging the Console Baud Rate Enabling or Disabling Modem Control OptionsEnabling or Disabling Slip Specifying a Slip AddressSpecifying a Slip Subnet Mask Switching Database Configuration Advanced Management ActivitiesObtaining a Vlan Perspective Default VlanVlan & Pvid Perspective Creating a New VlanAdding New Switch Ports Deleting a Vlan ID Viewing Vlan ActivitiesObtaining Additional Information Viewing Vlan SettingsSearching for MAC Addresses Scrolling Through DomainsAdding Ports Deleting PortsConfiguring Pvid IP Multicast Group PerspectiveMAC Address Perspective Port PerspectivePer Port Vlan Activities Scrolling Through MAC Addresses Per Port StatisticsIP Networking Per Port MAC LimitIP & RIP Settings ARP Table SettingsAdding Static ARP Table Entries Deleting Static ARP Table Entries Searching for ARP Table EntriesIcmp Routing TableVlan RIPDhcp Gateway Settings Deleting Routing Table EntriesSearching for Routing Table Entries Delay ServersRelays Ping Settings Bridging Spanning Tree Protocol Configurations Static FilteringSpanning Tree Functions Spanning Tree Port States Spanning Tree Path Costs Spanning Tree Port Priorities Snmp FunctionsProConnect II Series Stacking Basic Setting StackingProConnect II Series Other Protocols Port TrunkingSetting Quality of Service Parameters Setting Global Settings ProConnect II Series Specifying TCP/UDP Logical Port Settings User-Defined PortWell-Known Port Range PortSpecifying the QoS Vlan Priority Specifying the ToS Priority Selecting a QoS Profile Megabit ProfileGigabit Profiles Specifying the Port Configuration Selecting Rate Control Parameters Sending and Receiving Files Receiving Files via TftpSending Files via Tftp Receiving Files via Kermit Sending Files via KermitRmon MIB RFC 1757 and Bridge MIB RFC Snmp and Rmon ManagementSnmp Agent and MIB-2 RFC1213 Rmon Groups SupportedAppendix Bridge Groups SupportedAbout Fast Ethernet About Gigabit Ethernet Fiber Optic CablingTwisted-Pair Cabling Crimping Your Own Network Cables Glossary 115 117 119 121 123 125 127 Environmental SpecificationsLinksys Warranty Information Customerer SupportT p / / w w w. l i n k s y s . c o m

PC22604 specifications

The Linksys PC22604 is a reliable and efficient wireless router designed for both home and small office environments. With its exceptional performance and a range of advanced features, the PC22604 sets itself apart in the competitive market of networking devices.

One of the standout features of the Linksys PC22604 is its dual-band technology. Operating on both 2.4GHz and 5GHz frequencies, this router allows users to manage their bandwidth efficiently. The 2.4GHz band provides a wider coverage area, ideal for general web browsing and streaming, while the 5GHz band offers a higher speed connection, making it perfect for gaming and high-definition video streaming. This dual-band functionality ensures that users can enjoy seamless connectivity despite the growing number of connected devices in their homes or offices.

Equipped with advanced MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology, the Linksys PC22604 can communicate with multiple devices simultaneously. This means that users can enjoy uninterrupted connectivity while multiple devices are streaming, gaming, or browsing the internet. This is particularly beneficial in busy households or offices with numerous devices requiring a stable connection.

The router is built with a robust processor and ample RAM, ensuring that it can handle heavy data traffic without slowing down. The efficient hardware allows for faster data processing and minimal latency, enhancing the overall user experience.

Security is a major consideration in any networking device, and the Linksys PC22604 does not disappoint. It features advanced security protocols, including WPA2 encryption, which help protect user data and maintain privacy. Additionally, the router includes parental controls, allowing users to restrict access to specific websites or manage their children's internet usage effectively.

The Linksys PC22604 also supports easy setup and management through its user-friendly mobile app. This enables users to monitor their network, manage connected devices, and perform firmware updates with ease. The intuitive interface ensures that even those with limited technical knowledge can manage their home network confidently.

In summary, the Linksys PC22604 combines dual-band technology, MU-MIMO capabilities, strong security features, and user-friendly management options to provide a comprehensive networking solution. Its performance and features make it an excellent choice for users looking to enhance their connectivity experience in today’s digital age.
Top Page Image Contents