Linksys PC22604 manual Vlan & Pvid Perspective, Default Vlan, Obtaining a Vlan Perspective

Page 20

ProConnect II® Series

VLAN & PVID PERSPECTIVE

This section describes the default VLAN and how to obtain a VLAN perspec- tive.

Default VLAN

The IEEE 802.1Q standard defines VLAN ID #1 as the default VLAN. The default VLAN includes all the ports as the factory default. The default VLAN’s egress rule restricts the ports to be all untagged, so it can, by default, be easily used as a simple 802.1D bridging domain. The default VLAN’s domain shrinks as untagged ports are defined in other VLANs.

Obtaining a VLAN Perspective

The following procedure describes how to obtain a VLAN perspective. For convenience, the VLAN ID appears as both decimal and hexadecimal values side by side in the VLAN Perspective screen.

1.From the L2 Switching DataBase screen, highlight VLAN & PVID Perspective and press the Enter key. The VLAN & PVID Perspective screen will appear. Select VLAN settings.

From this screen you will be able to:

•Create a new VLAN

•Delete a VLAN ID

•View VLAN activities

•View or change a VLAN Configuration

To return to the VLAN & PVID Perspective screen, press the Esc key.

Layer 2 Management 4-Port Gigabit Ethernet Switch

Creating a New VLAN

1.From the VLAN Perspective screen in, hold down the Shift key and press the “+” key. The New VLAN Settings screen will appear.

.

2.With the VLAN ID field highlighted, press the Enter key. The Enter New VLAN ID screen will appear.

3.Enter a new VLAN ID as either a decimal or hexadecimal ID value from

1to 4094 (0xFFE).

4.Press Enter. The VLAN ID appears next to VLAN ID in the New VLAN Settings screen.

5.To enter an optional VLAN name, perform the following steps (the VLAN name is used to identify the VLAN at the local switch).

a)Press the Down Arrow key to move to VLAN Name.

b)Press Enter. The Enter New VLAN Name screen will appear.

30

31

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Layer 2 Management 4-Port Gigabit Ethernet Switch Copyright & Trademarks Table of Contents Default Vlan Introduction Snmp and Rmon Management 106Getting to Know the Switch LEDsRJ-45 Ports Gigabit Expansion PortsInstalling the Switch Positioning the SwitchFast Ethernet Considerations Full-Duplex ConsiderationsDesk Top or Shelf Mounting the Switch Installation is completeRack-Mounting the Switch Powering On and Resetting the SwitchSwitch Management Uplinking the SwitchInstalling the Gigabit Expansion Modules Local Console ManagementConfiguring the Switch Assigning an IP Address to the SwitchLogging On to the Switch Remote Console ManagementChanging the System Name General Management ConfigurationBasic Management Activities Changing the Location Changing the Administration PasswordChanging the Contact Changing the Guest Password Statistic CollectionReboot-on-Error Remote Telnet LoginRemote Http Login Returning to the Basic Management ScreenChanging the Speed and Flow Control LAN Port ConfigurationControl Setting the Line Speed Console Port Configuration Admin ControlChanging the Flow Control Displaying Physical Port AddressSpecifying a Modem Setup String Changing the Console Baud RateSelecting a Flow Control Method Enabling or Disabling Modem Control OptionsSpecifying a Slip Subnet Mask Enabling or Disabling SlipSpecifying a Slip Address Switching Database Configuration Advanced Management ActivitiesDefault Vlan Vlan & Pvid PerspectiveObtaining a Vlan Perspective Creating a New VlanAdding New Switch Ports Deleting a Vlan ID Viewing Vlan ActivitiesViewing Vlan Settings Searching for MAC AddressesObtaining Additional Information Scrolling Through DomainsAdding Ports Deleting PortsConfiguring Pvid IP Multicast Group PerspectivePer Port Vlan Activities MAC Address PerspectivePort Perspective Scrolling Through MAC Addresses Per Port StatisticsIP Networking Per Port MAC LimitAdding Static ARP Table Entries IP & RIP SettingsARP Table Settings Deleting Static ARP Table Entries Searching for ARP Table EntriesRouting Table VlanIcmp RIPSearching for Routing Table Entries Dhcp Gateway SettingsDeleting Routing Table Entries Relays DelayServers Ping Settings Bridging Spanning Tree Functions Spanning Tree Protocol ConfigurationsStatic Filtering Spanning Tree Port States Spanning Tree Path Costs Spanning Tree Port Priorities Snmp FunctionsProConnect II Series Stacking Basic Setting StackingProConnect II Series Other Protocols Port TrunkingSetting Quality of Service Parameters Setting Global Settings ProConnect II Series Specifying TCP/UDP Logical Port Settings User-Defined PortWell-Known Port Range PortSpecifying the QoS Vlan Priority Specifying the ToS Priority Selecting a QoS Profile Megabit ProfileGigabit Profiles Specifying the Port Configuration Selecting Rate Control Parameters Sending and Receiving Files Receiving Files via TftpSending Files via Tftp Receiving Files via Kermit Sending Files via KermitSnmp and Rmon Management Snmp Agent and MIB-2 RFC1213Rmon MIB RFC 1757 and Bridge MIB RFC Rmon Groups SupportedAbout Fast Ethernet AppendixBridge Groups Supported Twisted-Pair Cabling About Gigabit EthernetFiber Optic Cabling Crimping Your Own Network Cables Glossary 115 117 119 121 123 125 127 Specifications Linksys Warranty InformationEnvironmental Customerer SupportT p / / w w w. l i n k s y s . c o m

PC22604 specifications

The Linksys PC22604 is a reliable and efficient wireless router designed for both home and small office environments. With its exceptional performance and a range of advanced features, the PC22604 sets itself apart in the competitive market of networking devices.

One of the standout features of the Linksys PC22604 is its dual-band technology. Operating on both 2.4GHz and 5GHz frequencies, this router allows users to manage their bandwidth efficiently. The 2.4GHz band provides a wider coverage area, ideal for general web browsing and streaming, while the 5GHz band offers a higher speed connection, making it perfect for gaming and high-definition video streaming. This dual-band functionality ensures that users can enjoy seamless connectivity despite the growing number of connected devices in their homes or offices.

Equipped with advanced MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology, the Linksys PC22604 can communicate with multiple devices simultaneously. This means that users can enjoy uninterrupted connectivity while multiple devices are streaming, gaming, or browsing the internet. This is particularly beneficial in busy households or offices with numerous devices requiring a stable connection.

The router is built with a robust processor and ample RAM, ensuring that it can handle heavy data traffic without slowing down. The efficient hardware allows for faster data processing and minimal latency, enhancing the overall user experience.

Security is a major consideration in any networking device, and the Linksys PC22604 does not disappoint. It features advanced security protocols, including WPA2 encryption, which help protect user data and maintain privacy. Additionally, the router includes parental controls, allowing users to restrict access to specific websites or manage their children's internet usage effectively.

The Linksys PC22604 also supports easy setup and management through its user-friendly mobile app. This enables users to monitor their network, manage connected devices, and perform firmware updates with ease. The intuitive interface ensures that even those with limited technical knowledge can manage their home network confidently.

In summary, the Linksys PC22604 combines dual-band technology, MU-MIMO capabilities, strong security features, and user-friendly management options to provide a comprehensive networking solution. Its performance and features make it an excellent choice for users looking to enhance their connectivity experience in today’s digital age.
Top Page Image Contents