Linksys FESWSK05 v3, EZXS55W Network Neighborhood is Empty, You receive Dhcp Errors in Windows

Page 24

Instant EtherFast® Series

5.On the Access Control Tab, User Level Access is selected, but Shared Level Access is grayed out and not accessible.

•You previously had your primary network logon set to Client for NetWare Networks. On the Configuration tab of the Network Properties window, ensure that your primary network logon is set to Client for Microsoft Networks.

•Your personal web server PC or Microsoft Front Page may require you to choose a user level for security reasons.

6.In Network Neighborhood you can only see yourself and no other computers on the network.

•Make sure that the cables are connected correctly. Make sure you are get- ting Link or Activity lights on both the EtherFast Card and your switch. Try changing to a new cable that you know is working.

•Your workgroup name may be different from other computers on your network. Make sure each PC on the network is using the same workgroup name and protocol.

•Try using the Find Computer function.

7.In Network Neighborhood, you can see all other computers on the network but not yourself, and all other computers can see each other and not your computer.

•You may have not have enabled File and Printer Sharing. To do so, go to the Appendix and refer to the section called Sharing Your Files and Printers.

•The network card might not be setup properly. Try reinstalling the card’s drivers. Clean your system of the old installation, and then re-install.

8.Network Neighborhood is Empty.

•Verify that your Microsoft Client is installed. See the Windows 95 or 98 setup instructions in this guide for directions. Verify that you have logged in correctly. Refresh the screen by pressing F5 several times.

9.You receive DHCP Errors in Windows.

•If you are connecting to a DHCP server, check your cabling and connec- tion. If you require TCP/IP to be configured, check with your network administrator or your Windows documentation for proper settings.

•If you don’t have a DHCP server on your network and your network setup doesn’t require TCP/IP, you may remove the TCP/IP component from Windows’ networking. To do this, click on Start, Settings, Control Panel, then double-click on Network. Click once on the component entry with the words TCP/IP and Linksys or TCP/IP on its own, then click on the Remove button. Click OK when finished and restart your PC. If the problem persists, try running the diagnostics.

Fast Ethernet Switched 10/100 Network In a Box

10.In Network Neighborhood you can only see computers running the same operating system as your computer (i.e., your PC is running Windows 95 and it can only see other Windows 95 computers and not any computer running Windows 98 or Windows Millennium).

•Choose Start, Find, Computer and type the name of the computer in the window that comes up and click Find Now.

•Now make sure that the you are using the same protocol(s) and work- group name on the 95, 98 or Millennium computers. To do this, click Start, Settings, Control Panel on two computers running different Windows operating systems. Click on the Network icon, choose the Configuration tab, then click on the Identification tab for Workgroup name. Compare the protocols on both computers and make sure that they are the same. If any protocols are missing, refer to page 59 to install any needed protocol(s).

•If all computers are using the same protocol(s) and Workgroup name, and Windows 95 computers can't see Windows 98 computers, enable NetBIOS on all the computers using Windows 95, 98 and Millennium. Follow these instructions:

•The IPX/SPX-compatible protocol should be installed on all Windows computers (consult your Windows documentation if you need to add this protocol). Bring up the properties of the IPX/SPX-compatible protocol by clicking on Start, Settings, Control Panel, then double-click the Network icon. Choose the Configuration tab and highlight IPX/SPX-compatible Protocol. Click on Properties. Now, to install NetBIOS, click on the NetBIOS tab. Put a check next to I want to enable NetBIOS over IPX/SPX. Click OK, then OK again. Windows will copy the appropriate files to your computer. When asked to restart your PC, remove any flop- py disks and click OK. Be sure to do this on all of your computers that are having trouble seeing your entire network.

11.The workgroup, protocols, cabling and driver are all working properly, but the PC uses an AMD processor and it can only see itself in network neighborhood.

•In some instances with PCs using AMD processors, the IRQ assigned to the card by the BIOS (as it gets listed on the bootup screens of most PCs) doesn't correspond to the IRQ assigned by Windows. This can be fixed by disabling the IRQ holder for PCI Steering in the Windows Device Manager. Refer to your PC's documentation for instructions or you can follow the suggested instructions below. Keep in mind that this procedure will vary depending on your computer’s configuration.

•Click on Start, Settings, Control Panel, then double click the System icon. Click on the Device Manager tab. Open System Devices, then open PCI Bus.

41

42

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Fast Ethernet Switched 10/100 Network In a Box Copyright & Trademarks Table of Contents Linksys Fast Ethernet Switched 10/100 Network In a Box Package ContentsIntroduction EtherFast 10/100 5-Port Workgroup Switch EtherFast 10/100 LAN CardPer port UplinkTheOv rviewEtherFast 10/100 5-Port Workgroup SwitchOverview Installing the LAN Card Installing the LAN Card & CablingRemove your computers outside cover Once your EtherFast 10/100 LAN CardInstalling the Workgroup Switch Be disabledConnecting Your Hardware Together and Booting Up OverviewInstalling the Driver in Windows 95 Version B Installing the Drivers for Windows Installing the LAN Card’s DriverInstant EtherFast Series Installing the Drivers for Windows Millennium Installing the NetworkLAN Card’sCard’sDriversDriverWindows NT 4.0 Installation & Setup Log into Windows NT as an administratorInstalling NT Networking & the LAN Card Driver Click on the Select from list... button to select a LAN Card Page Instant EtherFast Series Instant EtherFast Series Windows 2000 Installation & Setup Instant EtherFast Series Configuring the LAN Card Configuring the LAN Card for Windows 95, 98, and MillenniumClient for Microsoft Networks Novell NetWare Server Setup Installing a 3.12 ServerInstalling a 5.x Server Installing a 4.x ServerTroubleshooting Troubleshooting for Windows 95, 98 and MillenniumYou receive Dhcp Errors in Windows Network Neighborhood is EmptyRunning the LAN Card’s Diagnostics Appendix Sharing Your Files and PrintersOverview Enabling File Sharing Enabling Printer SharingInstalling the Driver in Windows 95 Version a NetWare portion of your Windows Networking setup is completeWindows 95, 98 or Millennium Client for Windows NT Starting Over in Windows 95, 98, Millennium orStarting Over in Windows 95 , 98, and Millennium Instant EtherFast Series Starting Over in Windows Manually Installing the Network Components in Windows 95 Click on Start, Settings, then Control Panel About Wake-on-LAN CompatibilityInstalling and Configuring Wake-On-LAN Testing a Link Change WOL PCAbout Plug-and-Play PCI Technology Sending a Magic PacketGlossary Linux, Open Source, and Beta Operating SystemsInstant EtherFast Series Specifications Specifications for LNE100 verSpecifications for EZXS55W ver Warranty Information EnvironmentalTech Support RMA Issues Fax Contact InformationSales Information Web FTP SiteCopyright 2001 Linksys, All Rights Reserved
Related manuals
Manual 10 pages 45.61 Kb

EZXS55W, FESWSK05 v3 specifications

The Linksys FESWSK05 v3 and the EZXS55W are both notable pieces of networking hardware designed to enhance connectivity in various environments, from small businesses to homes. These Ethernet switches offer crucial features that facilitate efficient data transfer and network management.

The Linksys FESWSK05 v3 is a 5-port Fast Ethernet switch, utilizing a non-blocking architecture that allows for full wire-speed performance. Each port supports 10/100Mbps connections, making it a versatile choice for environments requiring high-speed data transfer. The switch is designed with ease of use in mind; it features a plug-and-play setup, eliminating the need for complex configuration. This makes it suitable for users of all technical levels. Furthermore, it includes auto-sensing technology that detects the speed of connected devices and automatically adjusts to ensure optimal alignment.

The EZXS55W, on the other hand, is a smart switch with features that cater to growing networking demands. It also supports 5 ports, with similar 10/100Mbps capabilities, but offers additional functionalities, such as a built-in web management interface. This allows for advanced features like VLAN support and Quality of Service (QoS). These capabilities enable users to prioritize traffic for bandwidth-sensitive applications such as VoIP and video conferencing, ensuring a stable and reliable connection.

Both models support Auto-MDI/MDI-X functionality, which simplifies installation by automatically detecting and configuring the type of connection. This is particularly useful for network administrators managing multiple connections without the need for crossover cables. Additionally, they are equipped with IEEE 802.3, 802.3u, and 802.3x standards compliance, ensuring compatibility with a wide range of devices.

In terms of physical characteristics, the Linksys switches are compact and designed for desktop or wall-mounted installation, making them suitable for space-constrained environments. Their fanless design ensures silent operation, which is ideal for both home and office settings.

Overall, the Linksys FESWSK05 v3 and EZXS55W are excellent choices for users seeking reliable, efficient, and straightforward networking solutions. With their robust feature set and user-friendly design, they provide the necessary foundation for a well-functioning network, catering to the demands of modern connectivity. Whether for home use or in a small office, these switches deliver performance and reliability that users can count on.
Top Page Image Contents