Linksys EG24M manual Adding Ports, Deleting Ports

Page 22

Linksys EtherFast® II Series

Adding Ports

To add ports to a VLAN:

1.After following steps 1-4 on page 35, hold down the Shift key and press “+”. ThePort Options screen will appear.

2.Select either Untagged Ports or Tagged Ports. Ports not allowed to be used in specific VLANs are labeled as Forbidden Ports.

To select Untagged Ports:

•Highlight Untagged Ports and press Enter. The Select Untagged Ports screen will appear, along with a list of the untagged ports that are not in use. Initially, there are 24 untagged ports you can select; this number decreases as you use untagged ports in your VLANs. In the following example, only untagged port 9 is available.

•To select an individual port, highlight it and press Enter. An asterisk

will appear next to each port you select (to deselect it, press Enter again to remove the asterisk).

To select all ports, highlight All Ports and press Enter.

•Press Esc. The port(s) you selected appear in the previous screen.

10/100 Managed 24-Port GigaSwitch

To select tagged ports:

•Highlight Tagged Ports and press Enter. The Select Tagged Ports screen will appear, along with a list of the tagged ports.

•To select an individual port, highlight it and press Enter. An asterisk

will appear next to each port you select (to deselect it, press Enter again to remove the asterisk).

To select all ports, highlight All Ports and press Enter.

•Press Esc. The port(s) you selected will appear in the previous screen.

3. When you finish, press Esc until you return to the desired screen.

Deleting Ports

The following procedure describes how to delete ports from a VLAN. Since there is no precautionary message that appears before you delete a VLAN port, be sure you want to delete the port before you begin.

1.From the screen at the bottom of page 35, use the Up Arrow and Down Arrow keys to highlight the port you want to delete.

2.Press the “-” (hyphen) key. The port is deleted.

36

37

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 10/100 Managed Port GigaSwitch Copyright & Trademarks Table of Contents Linksys EtherFast 10/100 Managed 24-Port GigaSwitch IntroductionGetting to Know the GigaSwitch LEDsFast Ethernet Considerations Installing the GigaSwitchPositioning the GigaSwitch Full-Duplex ConsiderationsUplinking the GigaSwitch Rack-Mounting the GigaSwitchPowering On and Resetting the GigaSwitch Installing the Gigabit Expansion ModulesSwitch Management Logging On to the GigaSwitch Configuring the GigaSwitchWeb-Based Configuration and Management Basic Management ActivitiesChanging the System Name General Management ConfigurationChanging the Administration Password Changing the LocationChanging the Guest Password Statistic CollectionRemote Telnet Login LAN Port ConfigurationReboot-on-Error Returning to the Basic Management ScreenSetting the Line Speed Changing the Speed and Flow ControlChanging the Flow Control Console Port ConfigurationDisplaying Physical Port Address Selecting a Flow Control Method Specifying a Modem Setup StringChanging the Console Baud Rate Enabling or Disabling Modem Control OptionsSpecifying a Slip Address Enabling or Disabling SlipSpecifying a Slip Subnet Mask Switching Database Configuration Advanced Management ActivitiesObtaining a Vlan Perspective Default VlanVlan Perspective Creating a New VlanAdding New Switch Ports Deleting a Vlan ID Viewing Vlan ActivitiesObtaining Additional Information Viewing Vlan SettingsSearching for MAC Addresses Scrolling Through DomainsAdding Ports Deleting PortsIP Multicast Group Perspective MAC Address PerspectivePer Port Vlan Activities Port PerspectiveScrolling Through MAC Addresses IP Networking Per Port StatisticsARP Table Settings IP & RIP SettingsAdding Static ARP Table Entries Deleting Static ARP Table Entries Searching for ARP Table EntriesIcmp Routing TableVlan RIPDeleting Routing Table Entries Dhcp Gateway SettingsSearching for Routing Table Entries Servers DelayRelays Ping Settings Bridging Static Filtering Spanning Tree Protocol Configurations Spanning Tree FunctionsSpanning Tree Port States Spanning Tree Path CostsSpanning Tree Port Priorities Snmp FunctionsLinksys EtherFast II Series Other Protocols Port TrunkingPort Mirroring Upgrading Firmware Snmp and Rmon Management Snmp Agent and MIB-2 RFC1213Rmon Groups Supported Rmon MIB RFC 1757 and Bridge MIB RFCBridge Groups Supported About Gigabit Ethernet AppendixAbout Fast Ethernet Fiber Optic CablingTwisted-Pair Cabling Crimping Your Own Network Cables Environmental SpecificationsLinksys Warranty Information Customer SupportT p / / w w w. l i n k s y s . c o m

EG24M specifications

The Linksys EG24M is a powerful and versatile network switch that caters to the needs of both small and medium-sized businesses. With its robust features and reliable performance, the EG24M has established itself as a go-to choice for enhancing network connectivity in diverse environments.

At the heart of the Linksys EG24M are 24 Ethernet ports, all of which support Gigabit speed. This allows for rapid data transfer rates, making it ideal for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers. All ports are auto-sensing and configure themselves automatically to the speed of connected devices, optimizing performance without the need for manual configurations.

One of the standout features of the EG24M is its support for Power over Ethernet (PoE). This technology enables the switch to deliver electrical power along with data over standard Ethernet cables, eliminating the need for additional power supplies for PoE-enabled devices like IP cameras, VoIP phones, and wireless access points. This simplifies installation and reduces clutter, allowing for flexible deployments in various environments.

The Linksys EG24M also incorporates advanced Layer 2 switching capabilities. It supports features such as VLANs (Virtual Local Area Networks), allowing network segmentation to enhance security and traffic management. This is particularly beneficial in larger networks where different departments or functions require isolated communication channels. Additionally, the switch supports Quality of Service (QoS) features, enabling prioritization of critical network traffic to ensure smooth performance for essential applications.

Security is another key aspect of the Linksys EG24M. It has built-in features to protect the network against unauthorized access, ensuring that sensitive data remains secure. The switch also supports storm control and broadcast control to mitigate network congestion and enhance overall performance.

In terms of design, the EG24M features a compact and robust form factor, which makes it suitable for mounting in standard racks or desktop environments. Its fanless design ensures silent operation, making it ideal for office use where noise can be a distraction.

In conclusion, the Linksys EG24M is an efficient and reliable network switch that combines high-speed connectivity with advanced features like PoE, VLAN support, and enhanced security. Its design and capabilities make it a valuable asset for any business looking to improve its network infrastructure. With Linksys backing its technology, the EG24M is poised to deliver exceptional performance and reliability for diverse networking needs.
Top Page Image Contents