| ProConnect® Series |
|
|
SETTING | FUNCTION |
|
|
Clear the Name | Clears all Port Names from the Name list. You |
List* | are asked to confirm before completing the pro- |
| cedure. Type “Y” and then press the [Enter] key |
| to confirm. A message will appear on the display |
| to indicate when the names have cleared. |
|
|
Restore Default | Clears all settings from memory and returns the |
Values* | unit to the factory defaults. You are asked to |
| confirm before completing the procedure. Type |
| “Y” and then press the [Enter] key to confirm. A |
| message will appear on the display to indicate |
| when the names have cleared. |
|
|
Lock Console* | Locks/Unlocks the Console. When the Console is |
| locked, only the current PC will be displayed on |
| the monitor but no input will be allowed, nor will |
| you be able to switch to a different port. The only |
| way to regain access to the PCs is by Unlocking |
| the Console. If a password is set, that will need |
| to be entered to Lock/Unlock the Console. If no |
| password has been set, pressing the [Enter] key |
| will Lock/Unlock the Console. |
|
|
*If a password has been set, you must supply the password to access these functions.
FACTORY DEFAULT SETTINGS
SETTING | DEFAULT |
Display Duration | Always On. |
Display Mode | The Port Number plus the Port Name. |
Scan Duration | 3 Seconds. |
ProConnect®
OSD Security
In order to prevent unauthorized access to the PCs, the OSD provides a pass- word security feature. If a password has been set, the OSD will request that the user provide it before allowing access.
To set a password:
1.Press the F6 key to bring up the setup configuration menu.
2.Move the Highlight bar to Set Password and press the Enter key.
3.Type in the new password and press the Enter key. (The password may be up to eight alphanumeric characters in length.)
4.Type in the new password again in order to confirm that it is correct and press the Enter key. If the two entries do not match, an error message will display, reading “PASSWORD NOT MATCH”. If this occurs, input your password again.
To modify or delete a password:
1.Press the F6 key to bring up the setup configuration menu.
2.Move the Highlight bar to Set Password and press the Enter key.
3.To Delete the Password: Delete the password and press the Enter key
To Modify the Password, Delete the previous password and type in the new password and press the Enter key.
4.Type in the new password again in order to confirm that it is correct and press the Enter key. If the two entries do not match, an error message will display, reading “PASSWORD NOT MATCH”. If this occurs, input your password again.
20 | 21 |