Linksys SRW2024P manual Port 10/100/1000 Gigabit Switch with Webview and PoE

Page 50

24-Port 10/100/1000 Gigabit Switch with Webview and PoE

Sample Type. Defines the sampling method for the selected variable and comparing the value against the thresholds. The possible field values are:

•Absolute. Compares the values directly with the thresholds at the end of the sampling interval.

•Delta. Subtracts the last sampled value from the current value. The difference in the values is compared to the threshold.

Startup Alarm. How the alarm is activated when the variable is compared to the thresholds. This can be set to

Rising, Falling, or Rising or Falling.

Rising Threshold. An alarm threshold for the sampled variable. If the current value is greater than or equal to the threshold, and the last sample value was less than the threshold, then an alarm will be generated. (After a rising event has been generated, another such event will not be generated until the sampled value has fallen below the Rising Threshold and reaches the Falling Threshold.)

Falling Threshold. An alarm threshold for the sampled variable. If the current value is less than or equal to the threshold, and the last sample value was greater than the threshold, then an alarm will be generated. (After a falling event has been generated, another such event will not be generated until the sampled value has risen above the Falling Threshold and reaches the Rising Threshold.)

Rising Event Index. Displays the mechanism in which the alarms are reported. The possible field values are:

•LOG. Indicates there is not a saving mechanism for either the device or in the management system. If the device is not reset, the entry remains in the Log Table.

•TRAP. Indicates that an SNMP trap is generated, and sent via the Trap mechanism. The Trap can also be saved using the Trap mechanism.

Both. Indicates that both the Log and Trap mechanism are used to report alarms.

Falling Event. The index of the Event that will be used if a falling alarm is triggered. If there is no corresponding entry in the Event Control Table, or if this number is zero, then no event will be generated.Owner. The name of the person who created this entry in the Control Table. (Maximum 127 characters)

Falling Event Index. Displays the mechanism in which the alarms are reported. The possible field values are:

•LOG. Indicates there is not a saving mechanism for either the device or in the management system. If the device is not reset, the entry remains in the Log Table.

•TRAP. Indicates that a SNMP trap is generated, and sent via the Trap mechanism. The Trap can also be saved using the Trap mechanism.

Chapter 5: Using the Web-based Utility for Configuration

41

Statistics Tab - RMON Alarm

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Port 10/100/1000 Gigabit Switch with Webview and PoE Copyright and Trademarks Word definitionTable of Contents Port 10/100/1000 Gigabit Switch with Webview and PoE Gigabit Ethernet Fiber Optic Cabling Appendix B Windows Help Appendix C Downloading using XmodemStartup Menu Procedures List of Figures Front Panel23 Port Status 23 Statistics Port Utilization 52 Admin Forwarding Database Introduction WelcomePort 10/100/1000 Gigabit Switch with Webview and PoE Getting to Know the Switch LEDsOther switches or routers PortsLAN Ports Gigabit Expansion PortsConsole Port Maximum Cabling Distances From Maximum Distance Connecting the SwitchOverview Before You Install the Switch Rack-Mount Placement Placement OptionsDesktop Placement Uplinking the Switch Web-based Utility for ConfigurationUsing the Console Interface for Configuration Configuring the HyperTerminal ApplicationConnecting to the Switch through a Telnet Session COM1 PropertiesConfiguring the Switch through the Console Interface Switch Main MenuSystem Configuration Menu System Information Management Settings User & Password Settings HTTP/HTTPS File Management Restore System Default Settings Port Status PoE Configuration Help Port 10/100/1000 Gigabit Switch with Webview and PoE Using the Web-based Utility for Configuration Accessing the Web-based UtilitySystem Information Setup Tab SummaryDevice Information PoE Information Setup Tab Network SettingsIP Configuration IdentificationManual Setup Tab TimeSet Time AutomaticPort Management Tab Port Settings Sntp ServersPort Setting Port Settings Port Setting DetailPort Management Tab Link Aggregation Port Management Link Aggregration Port Management Tab Lacp 10 Port Management LacpPort Management Tab PoE Power Settings 11 Port Management PoE Power SettingsSingle Vlan Vlan Management Tab Port SettingsVlan Management Tab Create Vlan Vlan RangeSwitch Port Mode Vlan Management Tab Ports to VlanVlan Management Tab Vlan to Ports 15 Vlan Management Vlan to PortsStatistics Tab Rmon Statistics 17 Statistics Rmon StatisticsStatistics Tab Rmon History History Control TableStatistics Tab Rmon Alarm 20 Statistics Rmon AlarmPort 10/100/1000 Gigabit Switch with Webview and PoE Event Setting Statistics Tab Rmon EventsStatistics Tab Port Utilization Statistics Tab 802.1x StatisticsACL Tab IP Based ACL 25 ACL IP Based ACLPort 10/100/1000 Gigabit Switch with Webview and PoE ACL Tab MAC Based ACL 26 ACL Mac Based ACLSecurity Tab ACL Binding 27 Security ACL BindingSecurity Tab Authentication Servers 28 Security Athentication ServersSecurity Tab 802.1x Settings 29 Security 802.1x SettingsSecurity 802.1x Settings Port Settings Security Tab Ports Security 30 Security Ports SecuritySecurity Tab Https Settings Security Tab Management ACLSecurity Tab SSH Settings 33 Security SSH SettingsSSH Host-Key Settings 34 Security SSH Host-Key SettingsQoS Tab CoS Settings QoS TabPort to CoS QoS Tab Queue SettingsCoS to Queue QoS Tab Dscp Settings QoS Tab Diffserv Settings39 QoS Diffserv Settings Edit Class Element Class Map40 QoS Diffserv Settings Edit Policy Element Policy MapQoS Tab Diffserv Port Binding QoS Tab BandwidthSpanning Tree Tab Global Settings Spanning Tree TabSpanning Tree Tab STP Settings 44 Spanning Tree STP SettingsSpanning Tree Tab STP Port Settings 45 Spanning Tree STP Port SettingsPort 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Multicast Tab Global Settings 46 Multicast Global SettingsMulticast Tab Static Member Ports Multicast Tab Static Router PortsMulticast Tab Member Ports Query Multicast Tab Router Member Ports QueryAdmin Tab User Authentication 51 Admin User AuthenticationAdmin Tab Forwarding Database Address AgingAdmin Tab Snmp Dynamic Address QueryAdmin Tab Log 54 Admin Log55 Admin Log Flash Logging Admin Tab Port Mirroring 57 Admin Port MirroringAdmin Tab Cable Test Admin Tab PingAdmin Tab Save Configuration Admin Tab Jumbo FrameAdmin Tab Firmware Upgrade Admin Tab Http UpgradeAdmin Tab Reboot Admin Tab Factory DefaultFiber Optic Cabling AppendixAAboutGigabitEthernetandFiberOpticCablingGigabit Ethernet Network Neighborhood/My Network Places Appendix B Windows HelpShared Resources Appendix C Downloading using Xmodem Startup Menu ProceduresFigure C-3 Browse Appendix D Glossary Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Appendix E Specifications Cable Diagnostics Tftp upgradeXmodem upgrade Port MirroringPort-based and 802.1q based VLANs Management VlanOperating Humidity 10% to 90% Storage Humidity 10% to 95% Operating Temperature 32 to 104F 0 to 50CTo 158F -20 to 70C Appendix F Warranty Information Limited WarrantyAppendix G Regulatory Information FCC StatementPort 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE Port 10/100/1000 Gigabit Switch with Webview and PoE 100 Appendix H Contact Information

SRW2024P specifications

The Linksys SRW2024P is a robust and versatile managed switch designed to meet the networking needs of small to medium-sized businesses. This switch features 24 Ethernet ports, making it suitable for connecting multiple devices while delivering exceptional performance and reliability. One of the standout features of the SRW2024P is its Power over Ethernet (PoE) capability, allowing users to power devices like IP cameras, VoIP phones, and wireless access points directly from the switch, eliminating the need for additional power sources and simplifying installations.

The SRW2024P supports a range of advanced technologies, including VLANs (Virtual Local Area Networks), which enable network segmentation and improved security by isolating different network segments. This segmentation can help enhance performance and control broadcast domains effectively. Additionally, the switch supports Quality of Service (QoS), allowing users to prioritize network traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance. This feature is particularly beneficial in environments with high-definition video streaming or VoIP communications.

Another critical aspect of the Linksys SRW2024P is its support for robust network security protocols. With features like 802.1X port-based authentication, network administrators can enforce strict access control policies, ensuring that only authorized devices can connect to the network. The switch also provides basic security features such as MAC address filtering and access control lists (ACLs), enhancing the overall security of the network.

The easy-to-use web-based management interface makes it simple for administrators to configure and monitor the switch. It provides real-time information about network performance, port status, and traffic statistics, allowing for effective troubleshooting and management. The SRW2024P also includes the capability for SNMP (Simple Network Management Protocol), enabling integration with third-party network management solutions for more advanced monitoring and control.

In terms of physical characteristics, the Linksys SRW2024P is designed for reliable performance in various environments, with a compact rack-mountable chassis. This design allows for easy installation in standard 19-inch racks, making it a practical choice for businesses looking to optimize their network infrastructure.

In summary, the Linksys SRW2024P managed switch combines advanced networking features, ease of management, and PoE capabilities, making it an ideal choice for growing businesses looking to enhance their connectivity and network performance. With its reliable security measures, VLAN support, and QoS capabilities, the SRW2024P provides a solid foundation for a robust and scalable network.
Top Page Image Contents