CONNECTING OTHER EQUIPMENT
4. Press and hold Volume 
or 
to adjust the listening level.
Note: If the volume level of your Wave® radio III cannot be adjusted high enough, increase the volume level of the connected audio device.
Using an external antenna
The Wave® radio III power cord is used as an antenna for FM and DIGITAL RADIO. If, after adjusting the position of the power cord, you still experience poor reception, you may need to install an external antenna. An external FM dipole antenna can be ordered through Bose Customer Service. See the phone numbers listed inside the back cover of this guide.
Installing an external antenna for FM radio
1.Plug the 3.5 mm (1/8") plug of the FM antenna into the FM ANTENNA connector.
2.Extend the ends of the antenna in a horizontal orien- tation as far from the unit and other external equip- ment as possible to establish optimum reception.
FM ANTENNA connector
Note: Many FM radio stations transmit a vertically polar- ized signal as well as, or instead of, a horizontally polarized signal. If the horizontal antenna orientation does not pro- vide good reception, try hanging the antenna in a vertical orientation.
Installing an external antenna for
DIGITAL RADIO
A DAB external dipole antenna is included with your system.
1.Insert the 2.5 mm plug of the DAB antenna into the
DAB ANTENNA connector.
2.Extend the antenna in a vertical orientation as shown by the vertical arrows.
3.Press and hold Mute to
4.Tune and check for the previously missing or poorly- received station(s).
DAB ANTENNA 
connector
CAUTION: The DAB antenna connector on this unit is not intended to be connected to a CATV system.
Connecting to a Lifestyle® system
You can use your Wave® radio III as a
Contact Bose Customer Service to obtain the required cables and instructions. See the phone numbers listed inside the back cover of this guide.
16 – English