Accton Technology warranty Warranty, Copyright, EM4582-SX-SC Slide-in Module, Safety Warning

CE Mark Declaration of Conformance for EMI and Safety (EEC)

This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to the following EMC specifications:

EN55022(1988)/CISPR-22(1985)	Class A
EN60555-2(1995)	Class A
EN60555-3
IEC1000-4-2(1995)	4kV CD, 8kV AD
IEC1000-4-3(1995)	3V/m
IEC1000-4-4(1995)	1kV - (power line),
	0.5kV - (signal line)
IEC 1000-4-6(1995)	3Vrms

This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC.

VCCI Class A Compliance (Japan)

Warranty

Accton warrants to the original owner that the product delivered in this package will be free from defects in material and workmanship for a period of three (3) years from the date of purchase from Accton or it’s Authorized reseller. For the warranty to apply, you must register your purchase by returning the registration card indicating the date of purchase and including proof of purchase. There will be a minimal charge to replace consumable components, such as fuses, power transformers, and mechanical cooling devices. The warranty does not cover the product if it is damaged in the process of being installed. Accton recommends that you have the company from whom you purchased this product install it.

THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. ACCTON SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCTON NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY.

Copyright

Copyright © 1999 by Accton Technology Corporation. All rights reserved. All trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.

International Headquarters	USA Headquarters
No. 1 Creation Road III,	6 Hughes
Science-based Industrial Park	Irvine, CA 92618
Hsinchu 300, Taiwan, R.O.C.	Phone Numbers -

Phone: 886-3-5770-270	Sales:	800-926-9288
FAX: 886-3-5770-267	Support:	888-398-4101 or 949-707-4847
Internet: support@accton.com.tw	RMA:	800-762-4968	EM4582-SX-SC

FAX: 949-707-2460	E0699-R01
	150079-102

EM4582-SX-SC Module

User’s Guide

The EM4582-SX-SC Slide-in Module

The EM4582-SX-SC slide-in module is designed for use in various Accton switch models. At present, suitable units include:

•CheetahSwitch Workgroup-3514F (ES3514F)

•CheetahSwitch Workgroup-3526F (ES3526F)

•CheetahSwitch Workgroup-3526G (ES3526G)

Contact your distributor for advice on newly released switches which may be designed for use with these modules.

Caution: Do not install this module in any other units.

The EM4582-SX-SC includes 1 1000BASE-SX (SC-Type) port which can be used for a high- speed backbone or server connection. Detailed information on configuring this module and advice about Gigabit Ethernet configuration rules can be found in the switch’s user guide.

Safety Warning

Before installing or removing the EM4582-SX-SC, first disconnect the switch from the main power supply. For full safety instructions, please refer to the user guide that accompanies the switch.

Warning: Optical Safety for Fiber Optic Modules

When using a fiber optic media expansion module, never look at

the transmit laser while it is powered on. Also, never look directly at the fiber TX port and fiber cable ends when they are powered on.

Avertissment: Ports pour fibres optiques - sécurité sur le plan optique

Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez jamais directement le port TX (Transmission) à fibres optiques et les embouts de câbles à fibres optiques tant qu'ils sont sous tension.