Advantech UNO 2173A/AF user manual Connecting Power, Installing a Hard Disk

Page 27

3.3 Connecting Power

Connect the UNO-2173A/AF to a 9~36 VDC power source. The power source can either be from a power adapter or an in-house power source.

3.4 Installing a Hard Disk

The procedure for installing a hard disk into the UNO-2173A/AF is below. Please follow these steps carefully.

1.Remove the power cord.

2.Unscrew the six screws from the bottom panel.

3.Install the HDD on the HDD bracket.

4.Connect the SATA signal cable to CN21 and connect SATA power cable to CN 22, then connect the other side of the cable to the SATA hard disk.

5.Screw back the bottom panel with the six screws.

19

Chapter3

Image 27

Contents Intel Atom Fanless Box PC with 1 x LAN, 2 x COM, Mini-PCIe UNO-2173A/AFCopyright AcknowledgementsSupport Product Warranty Safety Precaution Static Electricity Declaration of ConformityFCC Class a Technical Support and Assistance Safety Instructions Page Contents Appendix a System Settings and Pin Assignments Overview Introduction Hardware Specifications USB Ports Reserved Functions Battery Backup SRAM* 1MB Printer PortInterface Serial Ports Serial Port SpeedSafety Precautions UNO-2173A Chassis Dimensions Chassis DimensionsUNO-2173AF Chassis Dimensions Accessories Hardware Functionality Front panel of UNO-2173A/AF RS-232 Interface COM1~COM2RS-422/485 Interface UNO-2173AF 1 RS-422/485 SelectionAutomatic Data Flow Control Function for RS-485 Termination Resistor SW3 LAN Ethernet ConnectorPower Connector PS/2 Keyboard and Mouse ConnectorUSB Connector VGA Display ConnectorBattery Backup Sram Reserved Power Button / Power Management Lithium Battery SpecificationOutput voltage 3 VDC Lvds UNO-2173AF Reset ButtonHD Audio UNO-2173AF PCI Express Mini Card SocketPage Initial Setup Chassis Grounding Inserting a CompactFlash CardInstalling a Hard Disk Connecting PowerInstalling a Wireless LAN Card and Antenna Wireless Module PCI Express mini cardRear Panel for Antenna Antenna Bios Setup System Settings and Pin Assignments System I/O Address and Interrupt Assignment Appendix a System Settings and Pin AssignmentsTable A.2 UNO-2173A/AF Interrupt Assignment Label Function Board Connectors and JumpersRS-232 Standard Serial Port COM1~COM2 RS-422/485 Serial Port UNO-2173AF Power Connector PWRTable A.7 Keyboard and Mouse connector pin assignments Table A.9 VGA adaptor cable pin assignment Lvds Lvds and Lvdspwr UNO-2173AFLvdspwr Backlight Control Lvds Power Setting CN17Clear Cmos CN3