Advantech POC-S196 manual Classification

Page 4

Caution! Do not leave this equipment in an uncontrolled environment where the storage temperature is below -20°C (-4°F) or above 60°C (140°F). This may damage the equipment.

If your computer clock is unable to keep accurate time or the BIOS configuration resets to default, please check the battery.

Caution! Do not replace the battery yourself. Please contact a qualified technician or your retailer.

The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

Improper installation of VESA mounting can result in serious personal injury! VESA mount installation should be completed by a professional technician, please contact the service technician or your retailer if you need this service. The detailed installa- tion procedure is specified in Appendix A.

CLASSIFICATION:

!Supply Class I adapter

!No applied parts

!IPX1

!Continuous operation

!Not categorized as AP or APG

Warning! This device is not suitable for use in the presence of flammable anes- thetic mixture with air, oxygen, nitrous oxide, or as a life support system.

Maintenance: To properly maintain and clean the surfaces, use only the approved products or clean with a dry applicator.

Caution! When servicing the device, always use replacement parts that meet Advantech standards. Advantech Medical cannot warrant or endorse the safe performance of third-party replacement parts for use with our medical device.

Make sure users do not come in contact with SIP/SOPs and the patient at the same time.

When connecting electrical devices, the operator is responsible for ensuring that the resulting system meets the requirements set forth by the following standards:

POC-S196 User Manual

iv

Image 4
Contents POC-S196 Instructions for the User DefinitionsSafety Instructions Classification FCC Class B EN 60601-1-1 IECList of Accessories Additional Information and AssistanceDistributed in Europe by Viii Contents Appendix a Utilities and Hot FixesChapter General InformationSpecifications IntroductionGeneral Information Display interfaceTouchscreen Specification LCD Specifications DimensionsPage System Setup Quick Tour of the POC-S196 FunctionSystem Setup Rear view of the Point-of-care terminalInstallation Procedures Connecting the Power CordRunning the Bios Setup Program Installing System SoftwareInstalling the Drivers File directory on the Drivers and Utilities CD-ROMChipset and Graphics Setup Chipset Chipset and Graphics Setup Installation of Chipset DriverInstallation for Windows XP Chipset and Graphics Setup Page Chipset and Graphics Setup Page Audio Interface Installation of Audio Driver Installation for Windows 2000/XP Audio InterfaceFurther Information PCI Express Ethernet Interface Installation of the Ethernet Driver PCI Express Ethernet Interface Further Information Touch Panel Interface Installation of Touch Panel Driver Touch Panel Interface Page Touch Panel Interface Further Information Utilities and Hot Fixes Window Audio Volume Application Wakeup by External USB Device at S3 Resume WakeupOperation Information Disconnect the Power Plug in the Power AdapterThermal Information General Safety Guide Operation InformationPage Description Connectors Appendix aDescription of Connectors Appendix a Description of Connectors Table A.1 Description of Connector Appendix B Windows Display Hot Key FunctionWindows Display Hot Key Function Hot Key Display DeviceAppendix B Windows Display Hot Key Function