Telnet Management
Telnet is done over the network. You can manage the switch via Telnet. First you have to assign a unique IP address to the switch, then you can use the Telnet Management method.
Follow these steps to manage the Switch
1.Assign an IP address to the switch
Run Telnet (e.g., telnet 192.168.168.168 , which is the factory default values for the HomePNA Switch)
2.Log into the switch
The Log In figure displays the following messages. Before you start a management session, enter the password required.
Default: No password is required. Press Enter to log in for the first time. It is recommended that you set a password for security and management purpose.
Version 2.24
Managed HomePNA Switch
Admin password :
command>
help or ?
The following menu lists the keystroke and typographic conventions available on the Switch.
command>help Version 2.24v
===========================================================
Help | Show this message |
Show | Displays active configuration |
- 33 -