uptime
Displays how much time the switch has been running.
Example:
command>uptime
System Name:Untitled
System Uptime:90 seconds.
enable #
Each port can be set to enabled or disabled. You can only log in ports which are enabled, and make changes on them. After performing this command, there will be a listing of ports displayed on the screen.
Example: command>enable 13
Port Enable Power Threshold RxCounter TxCounter Link label
==== ====== ===== ========= ========= ========= ==== =====
0 | Yes | 5 | 4 | 180 | 10332 | management |
1 | Yes | 5 | 4 | 0 | 10170 | port 1 |
2 | Yes | 5 | 4 | 0 | 10170 | port 2 |
3 | Yes | 5 | 4 | 0 | 10170 | port 3 |
4 | Yes | 5 | 4 | 0 | 10170 | port 4 |
5 | Yes | 5 | 4 | 0 | 10170 | port 5 |
6 | Yes | 5 | 4 | 0 | 10170 | port 6 |
7 | Yes | 5 | 4 | 0 | 10170 | port 7 |
8 | Yes | 5 | 4 | 0 | 10170 | port 8 |
- 37 -