ADTRAN D4 U-BR1TE V warranty IDSL/DDS Trouble Codes 2B Leased Mode Operation

Page 13

During a remote end initiated loopback the system transmits ASC 9Eh toward the network, indicating an out-of-service condition generated by the remote end, as shown in Figures 10 and 11.

All IDSL/DDS system latching loopbacks, whether initiated by the IDSL DCU-R craft interface, LBK pushbutton, CO, or from a remote Test Center, can be released by sending 35 DDS loop down TIP bytes <X0111010> (Where X is a “don’t care” bit). All existing latching loopbacks will also be disabled by pressing the LBK pushbutton on the CO or remote unit.

NOTE

The remote end test feature is only supported when the upstream U-BR1TE is an ADTRAN D4 or Series 5 U-BR1TE with DDS Loopback capability. Other U-BR1TEs will ignore the loopback command sent by pressing the IDSL OCU-R LBK button.

IDSL/DDS Trouble Code

The IDSL/DDS system provides a quick diagnosis in the case of a circuit condition where continuity is broken. The trouble code type received by a tester determines whether the open condition is occurring on the local loop or at the customer premises. In the event of a 2-wire DSL loss of signal, loss of sync, or open condition caused by an open conductor or disconnected 2-wire loop, the U-BR1TE V transmits a MUX-Out-of-Sync trouble code (MOS 9Ah) into the network as shown in Figure 12. During a similar out-of-service condition at the customer premises, the IDSL OCU-R transmits Abnormal Station Code (ASC 9Eh) upstream toward the network as shown in Figure 12.

 

Channel Bank

Customer Premises

 

 

 

Open 2-wire Loop

 

MOS 9Ah

U-BR1TE

IDSL OCU-R

DSU

 

IV

 

 

 

 

Channel Bank

Customer Premises

 

 

Open 4-Wire Customer

 

 

Interface

 

ASC 9Eh

 

ASC 9Eh

 

U-BR1TE

IDSL OCU-R

DSU

 

IV

 

 

 

Figure 12. IDSL/DDS Trouble Codes

2B Leased Mode Operation

The U-BR1TE V is deployed in 2B leased line operation to provide DDS/Frame Relay services to ISDN equipment. By using the 2-wire ISDN interface for 128 kbps data rate, the U-BR1TE V Leased Mode Operation allows pair savings over traditional DDS deployment. DDS/Frame Relay support allows loopback testing to be performed across the ISDN transport system in this configuration.

The U-BR1TE V will decode DDS latching loopback sequences coming from the carrier into eoc loopback commands usable by traditional ISDN equipment. See Figure 13 for various U-BR1TE V DDS 2B Leased Mode arrangements. In a SLC-96 network the U-BR1TE V units will operate in both 2B+D or 2B mode. Both units must be in the same mode.

Loopback Operation

To enable detection of DDS latching loopbacks, the ADTRAN U-BR1TE V must be provisioned as an LT- like device in leased 128 kbps (2B) mode of operation.

When B1 and B2 are enabled, data on both channels are looped in response to a DDS latching loopback sequence detected on channel B1. The U-BR1TE V will respond to a DS0 latching loopback intended for DS0 #1. Loopback commands intended for DS0 #2 and greater are re-mapped to ISDN eoc loopback commands addressed to the appropriate unit.

The U-BR1TE V will map a CSU latching loopback sequence to an ISDN eoc NT1 loopback. Figure 13 shows the DDS latching loopback commands that will loop each unit.

NOTE

Only the B1 channel will detect the DDS loopback sequences for activation and deactivation of DS0 and CSU latching loopbacks. All standard U-BR1TE units between the ADTRAN U-BR1TE V and the NT1 device must have the D-channel enabled in order for loopbacks to be processed beyond the U-BR1TE V.

61104020L4-5C

Section 61104020L4-5, Issue 3

13

Image 13
Contents General L4-5C Issue 3, May Clei Code D4C5BENBISDN/DDS Revision History2B Leased Mode Features FeaturesInstallation Physical RequirementsBackplane Pin Assignments SLC-96 Bank Requirements Option Switch SettingsInterface Requirements Switch Label Function Description SW1, SW3, and SW6 Option SettingsIsdn Front Panel FeaturesTesting Rotary Switch OptionsLED Indication Point-to-Point Test CRTX, Lptx Loopback Tests ADR1 ADR6, NT1Local Performance Monitoring Local Loopback LpbkIDSL/DDS Description DDS TestingFront Panel Tests DS0 DP Loopback EOC RemappingInitiate Loopback at Idsl OCU-R Adtran U-BR1TE Bidirectional Loopback Performance MonitoringRemote End Initiated LBK Tests IDSL/DDS Trouble Code IDSL/DDS Trouble Codes 2B Leased Mode OperationWarranty and Customer Service Maintenance

D4 U-BR1TE V specifications

ADTRAN D4 U-BR1TE V is a state-of-the-art broadband networking solution designed to support next-generation services with a focus on reliability, flexibility, and high-speed connectivity. As telecommunications companies strive to meet the ever-increasing demand for bandwidth, the D4 U-BR1TE V stands out as a powerful tool that enables service providers to deliver superior services to their customers.

One of the main features of the ADTRAN D4 U-BR1TE V is its versatility in deployment options. This device can be used in various environments, including central offices, remote locations, and outdoor settings. It supports multiple access technologies, such as VDSL2, ADSL2+, and Ethernet, allowing operators to choose the best technology for their specific needs. This flexibility ensures that service providers can efficiently leverage their existing infrastructure while expanding their service offerings.

The D4 U-BR1TE V is equipped with advanced vectoring technology that significantly reduces crosstalk interference, thereby enhancing the overall performance and capacity of DSL connections. This allows operators to extend the reach of their broadband services while delivering higher speeds to end-users. Alongside vectoring, it incorporates G.fast technology, enabling ultra-fast broadband speeds over short copper lines, making it ideal for dense urban areas or multi-dwelling units where bandwidth demand is highest.

In addition to its robust performance capabilities, the ADTRAN D4 U-BR1TE V is designed with operational simplicity in mind. It features an intuitive graphical user interface that streamlines management and monitoring tasks, reducing the burden on network operations teams. Furthermore, its support for cloud-based management platforms allows service providers to automate network monitoring and troubleshooting, ensuring high service levels and quick resolution of issues.

Another notable characteristic of the D4 U-BR1TE V is its scalability. Service providers can easily expand their network by adding additional units as demand grows, ensuring that they can meet the future needs of their customers without extensive overhauls or infrastructure upgrades.

In conclusion, the ADTRAN D4 U-BR1TE V represents a significant advancement in broadband technology. By combining flexibility, high performance, and ease of management, it empowers service providers to deliver enhanced broadband experiences to their customers while efficiently managing their network resources. With its comprehensive feature set and future-proof capabilities, it is an essential component for operators seeking to stay competitive in the increasingly demanding telecommunications landscape.