ADTRAN D4 U-BR1TE V warranty 2B Leased Mode Features, Installation, Physical Requirements

Page 2

Features

The U-BR1TE V features support both ISDN and DDS, plus features common to both as listed here:

ISDN Features

•Span powers U-repeaters with 43 mA @ -28 to -120 VDC for ISDN applications.

•Internal test pattern allows for testing of individual B Channels without requiring external test equipment.

•Transportation of ISDN Basic Rate 2B+D information over T1 facilities in the 3-DS0 format specified in TR-NWT-000397.

•B1 and B2 loopback addressability at the front panel for the NT1 and up to six devices in the Network-to-Customer direction.

DDS Features

•Span powers an IDSL OCU-R with 12 mA @ -120 VDC for DDS applications.

•Transmit MUX-Out-of-Sync (MOS) trouble code upstream for IDSL loss of signal, loss of sync, or open loop.

•Perform bidirectional loopback (loop and network) when commanded into DS0 DP loopback from the network direction only.

•Initiate in-band OCU loopback to loop the IDSL OCU-R via front panel push button.

•Loopback release in response to TIPs per TR62310 or front panel push button.

•Remap all subsequent DS0 DP loopback codes into respective EOC loopbacks to loop back respective downstream U-Repeaters, TRISDN elements, and U-BR1TES when optioned for 1B+D, or 2B+D.

•Pass OCU loopback code through to loop the IDSL OCU-R.

•Pass CSU loopback code through to loop the CSU/DSU and simultaneously send a remap to the NT1 EOC address.

•Returns Abnormal Station Code (ASC) to the network in B1 during loopback conditions initiated by the IDSL OCU-R.

2B Leased Mode Features

•DDS loopback operation during 2B data mode only.

Common Features

•ISDN 2B1Q interface which meets all Layer 1 requirements as specified in ANSI T1.601-1991.

•18 kft nominal range on mixed gauge wire.

•All Layer 1 maintenance function and performance monitoring as specified in TR-NWT-000397 and TR-TSY-000829.

•Distinctive metallic DC test signature to identify either line unit LT or line unit NT mode of operation as specified in TR-NWT-0000397.

•Provides loopback capability for full 2B+D as well as individual B channels in both loop and carrier directions. Individual B channel loopbacks may be initiated at the U-BR1TE V front panel or from a remote location through the maintenance channel.

•DS0 logic level transmit and receive data access through front panel bantam jacks.

•A built-in Cyclic Redundancy Check (crc) clock error detector allows for local performance monitoring at the front panel without test equipment.

•Addressing and error status with front panel LED indicators. Test function chosen by a front panel ten-position rotary switch.

The U-BR1TE V is compatible in functionality and is interchangeable with the U-BR1TE III w/PWR (1103020L4) except when used in DDS applications. In addition to being compatible and interchangeable with the just mentioned ADTRAN unit, the U-BR1TE V, adds features in leased mode, including DS0 DP latching loopback and sending Multiplexer-Out-of -Sync (MOS) toward the network.

2. INSTALLATION

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY.

HANDLING PRECAUTIONS REQUIRED.

After unpacking the unit, inspect it for damage. If damage is noted, file a claim with the carrier, then contact ADTRAN. See Warranty and Customer Service.

Physical Requirements

The U-BR1TE V plugs into a single D4/SLC-96 channel slot. The backplane pin assignments are illustrated in Figure 2. When provisioned for basic rate service (2B+D), the U-BR1TE V occupies three time slots. In a D4 or SLC-96 Mode III channel bank, it occupies the time slot associated with the physical channel slot that it occupies plus the next two time slots to the right. The physical channel slots, whose time slots are used in this manner, must remain unoccupied.

2

Section 61104020L4-5, Issue 3

61104020L4-5C

Page 1 Page 3
Image 2
Page 1 Page 3
Contents ISDN/DDS L4-5C Issue 3, May Clei Code D4C5BENBGeneral Revision HistoryInstallation Features2B Leased Mode Features Physical RequirementsBackplane Pin Assignments Interface Requirements Option Switch SettingsSLC-96 Bank Requirements SW1, SW3, and SW6 Option Settings Switch Label Function DescriptionFront Panel Features IsdnLED Indication Rotary Switch OptionsTesting Loopback Tests ADR1 ADR6, NT1 Point-to-Point Test CRTX, LptxLocal Loopback Lpbk Local Performance MonitoringDDS Testing IDSL/DDS DescriptionInitiate Loopback at Idsl OCU-R DS0 DP Loopback EOC RemappingFront Panel Tests Remote End Initiated LBK Tests Performance MonitoringAdtran U-BR1TE Bidirectional Loopback IDSL/DDS Trouble Codes 2B Leased Mode Operation IDSL/DDS Trouble CodeMaintenance Warranty and Customer Service

D4 U-BR1TE V specifications

ADTRAN D4 U-BR1TE V is a state-of-the-art broadband networking solution designed to support next-generation services with a focus on reliability, flexibility, and high-speed connectivity. As telecommunications companies strive to meet the ever-increasing demand for bandwidth, the D4 U-BR1TE V stands out as a powerful tool that enables service providers to deliver superior services to their customers.

One of the main features of the ADTRAN D4 U-BR1TE V is its versatility in deployment options. This device can be used in various environments, including central offices, remote locations, and outdoor settings. It supports multiple access technologies, such as VDSL2, ADSL2+, and Ethernet, allowing operators to choose the best technology for their specific needs. This flexibility ensures that service providers can efficiently leverage their existing infrastructure while expanding their service offerings.

The D4 U-BR1TE V is equipped with advanced vectoring technology that significantly reduces crosstalk interference, thereby enhancing the overall performance and capacity of DSL connections. This allows operators to extend the reach of their broadband services while delivering higher speeds to end-users. Alongside vectoring, it incorporates G.fast technology, enabling ultra-fast broadband speeds over short copper lines, making it ideal for dense urban areas or multi-dwelling units where bandwidth demand is highest.

In addition to its robust performance capabilities, the ADTRAN D4 U-BR1TE V is designed with operational simplicity in mind. It features an intuitive graphical user interface that streamlines management and monitoring tasks, reducing the burden on network operations teams. Furthermore, its support for cloud-based management platforms allows service providers to automate network monitoring and troubleshooting, ensuring high service levels and quick resolution of issues.

Another notable characteristic of the D4 U-BR1TE V is its scalability. Service providers can easily expand their network by adding additional units as demand grows, ensuring that they can meet the future needs of their customers without extensive overhauls or infrastructure upgrades.

In conclusion, the ADTRAN D4 U-BR1TE V represents a significant advancement in broadband technology. By combining flexibility, high performance, and ease of management, it empowers service providers to deliver enhanced broadband experiences to their customers while efficiently managing their network resources. With its comprehensive feature set and future-proof capabilities, it is an essential component for operators seeking to stay competitive in the increasingly demanding telecommunications landscape.
Top Page Image Contents