Installation Manual | Chapter 3 Troubleshooting |
H3C S1526 Smart Ethernet Switch |
zThe console cable is in good condition and the terminal (HyperTerminal for example) parameter settings are correct. Refer to section 2.4.1 “Configuring Terminal Parameters” for information about terminal parameter settings.
II.Garbled characters on the terminal
Make sure you have set on your terminal the following parameters correctly (HyperTerminal):
z
z
z
z
z
z
Bits per second = 9600 Data bits = 8
Parity = None Stop bits = 1
Flow control = None
Terminal emulation = VT100 or Auto detect
Reconfigure the parameters if their values are different from the above.