Adder Technology SV12PRO, SV16PRO manual Firmware functions version query, mouse restore and reset

Page 35

4.6 Firmware functions (version query, mouse restore and reset)

For technical support purposes, it may be necessary to find the firmware release version for the control software in your SmartView. For example, if the release version is v1.02 the response shown to F1(enter) will be a brief display of the digit ‘1’, then F2(enter) will be a brief display of the digit ‘0’, then F3(enter) will be a brief display of the digit ‘2’. You can reset all of the configured options back to the factory default states by typing F8. Use options F5 and F6 to restore mouse function on disconnected PS/2 CPU mouse connections. See section 2.9 for full details.

F1 - Display firmware first digit

F2 - Display firmware second digit

F3 - Display firmware third digit

F5 - Restore PS/2 mouse function to the currently selected CPU’s mouse port F6 - Restore IntelliMouse function to the currently selected CPU’s mouse port

F8 - Reset all configurations to factory default settings. An ‘r’ will show briefly on the display to confirm that the reset has been completed.

4.7 Display appearance options

Options are available to change the colour scheme of the On-Screen Display and the time that the confirmation message remains on the screen after a channel has been selected.

D1 - Menu appears with magenta / blue background and green highlight (default) D2 - Menu appears with red / blue background and green highlight

D3 - Menu appears with blue / black background and light blue highlight

D4 - Confirmation message remains on screen for standard time period (default) D5 - Confirmation message remains on screen for short time period

D6 - Confirmation message remains on screen for extended time period

SmartView

Installation and Use

Page 34

Image 35

Contents Smart View PRO About this manual Safety informationWarranty European EMC directive 89/336/EEC Radio Frequency EnergyContents Appendices SmartView configuration optionsIntroduction Key featuresPackage contents SmartView SV8PRO Product informationSmartView SV4PRO SmartView SV12PRO SmartView SV16PRO What you will need InstallationMounting the SmartView Connecting your devicesTo enter configure mode whilst the SmartView is running Configuring your PCsConfiguring the SmartView To enter configure mode at power onH2f Ef Summary of SmartView configuration optionsU4 SmartView channels are switchable using 3 button mouse Other useful installation information Re-enabling a disconnected PS/2 mouse SmartView Installation and Use Status lights Using the SmartViewPower on status Front panel keys and remote controllerAuto and Select keys pressed together Lock function Auto keyStatus display Keyboard hotkey control Using the dual control ports a and B‘HOTKEYs’ and ‘1 then 3’ selects channel ‘HOTKEYs’ and ‘1 then 0’ selects channel‘HOTKEYs’ and ‘1 then 1’ selects channel ‘HOTKEYs’ and ‘1 then 2’ selects channelOn Screen Menu control SmartView Installation and Use Selecting a computer on the menu list Deleting a computer from the menu listEditing a computer on the menu list Summary of keys used by the menu and their function Mouse controlRS232 control Cascading SmartViewsSmartView Installation and Use Typical cascade of two SmartViews Autoscan ‘lock on’ mode and delay time Screen saver time delaySmartView Installation and Use Mouse mode and mouse switching of channels Keyboard hotkey combination Display appearance options Firmware functions version query, mouse restore and resetOFREDg Setting a security passwordCascade query code Exit configure modeA1. Keyboard, monitor and mouse to SmartView Appendix A. Cable and connector specificationsCable specification Cable specificationsA3. Expansion port pin assignments Action Appendix B. Problem SolvingProblem Mouse causes channel to change Problem SmartView Installation and Use S TA L L AT I O N & U S E

Related manuals

Manual 44 pages 27.08 Kb