Desktop Installation
ÿSet the Switch on a clean, smooth, level, and sturdy surface with a power outlet nearby.
ÿMake sure there is enough clearance around the Switch to allow attachment of cables, power cord and air circulation.
Attaching Rubber Feet
ÿMake sure the surface on the bottom of the Switch is grease and dust free.
ÿRemove adhesive backing from the rubber feet and apply them to each corner on the bottom of the Switch, to minimize shock and vibration.
Power On
ÿConnect the power cord to the power socket on the rear panel of the Switch. ÿConnect the power cord to any power outlet in the range
Page 7